Jump to content

Tbox56

Registered User
  • Posts

    131
  • Joined

Posts posted by Tbox56

  1. This is a car I am marketing for the owner. It appears to be a very nice clean example of a Birkin S3. Below is a list of features this car has.

     

     

    2003 Birkin S3. 6987 miles

    • Dunnell built engine

    • Twin throttle bodies

    • Individual coil on each spark plug

    • Haltec sport 1000 programmable engine managing system

    • Kasei K1 race wheels (5) with new Nitto road tires (4) spare tire ok for emergency use

    • Detachable steering wheel- a big asset for getting in and out

    • Polycarbonate wind deflectors

    • Extended exhaust, exiting at the rear of the car

    • Five point G Force race harness plus three point regular inertia seat belts

    • Black paint condition 8 on a scale of 1-10

    Extra item included

    • Tall roll bar with race harness and go-pro mounts

    • Tonneau cover

    • Car dust cover

    • Set of 4 hard front disc pads.

    Please contact me with any questions or more information.

     

    Tom

    970-376-5188

    dash2.jpg

    front.jpg

    image1.jpg

    image6.jpg

    interior.jpg

  2. Here is a picture of a dipstick tube made from a soft thin wall aluminum using the standard dip stick. This is on a 2.5 L Duratec, at the top you can see it going in between number 3 and number 4 extension tube on the throttle bodies. You can then access the dipstick from the top of the engine. With the compound curves you will need to corkscrew your dipstick to get it to bend multiple directions.

     

    Tom

    20170426_120308.jpg

  3. Not for the classic size cars. I have another order in production I could probably add to, should I get you one? Usually I get them 75mm taller than standard. Keep in mind if you have a full hood it won't work with the tall roll bar, the Birkini probably will with longer rear tie down straps.

     

    Tom

  4. They should be 1 for front brakes 1 for rear brakes and 1 for clutch. I would guess that the person that built your car made the middle one the rear brakes. the bias bar should be set heavy to the front therefore you are not noticing that you have no rear brakes. Tom

  5. We can help you with many of the items on your list.

    1. Front turn signals not visible from side

    HAVE ONES THAT ARE

    2. Back up light not bright enough

    HAVE LED TAIL LIGHTS THAT ARE BRIGHT

    3. No defroster (has no heater)

    HAVE ELECTRIC HEATED WINDSCREENS

    4. No washer fluid sprayers

    HAVE WASHER KITS

    5. No secondary strap on external fuel pump

    6. No brake fluid pressure indicator light

    FLUID LEVEL LIGHTS ARE IN THE STOCK WIRING LOOM

    7. Exposed exhaust system

    8. Wiring too close to steering column

    9. No safety etching on windshield

    10. No bumpers

    DON'T HAVE ANY BUT NOT THAT TOUGH TO DO

    11. No cup holders (just kidding)

    WE HAVE THESE BUT THEY ONLY FIT THE 64OZ BIG GULP AND REPLACE THE PASSENGER SEAT :)

     

    Contact me if you would like help with these items

     

    Good luck,

    Tom

    970-376-5188

×
×
  • Create New...