Jump to content

Sabre Seven - Car + Trailer + Spares - $13,900


Recommended Posts

Sold today ! Thank you all for reading my adv't. I told the new buyers about this site, and how informative it is.

 

Sabre Seven (HS Engineering) Car + Trailer + Spares $13,900

 

Mega professional updates. Was & can be street legal (needs emergency brake). $45,000 invested - my loss = your gain.

Receipts available. $13,900 – negotiable. PM me with questions.

 

Car + chassis:

1. HS Engineering Sabre 7 – manufactured 1989 (featured in various kit car magazines)

2. 91” wheel base

3. California car with CARB sticker

4. 1 ¼” square tubing frame

5. Aluminum body + fiberglass clamshell front fenders + fiberglass rear fenders

6. Aluminum cycle style front fenders – fit 10” wide slicks

7. Drivetrain and suspension – Ford Pinto based with full custom racing upgrades

8. Roll cage – professionally built (bolt-in) – SCCA road racing legal for next weight class

9. Tops - #2 with doors

10. Tonneau cover

11. Gauges – all new Auto-Meter (2019) except speedometer

12. Switches & wiring – new Painless Performance (2019)

13. Windshield + #2 Brooklands style wind screens

 

Drivetrain + related:

1. Ford 2000cc 1972 – professionally rebuilt with all performance parts

2. Cylinder head professionally rebuilt – October 2019

3. Race type performance camshaft

4. 10.5:1 compression ratio

5. Dual Weber DCOE 40 carburetors

6. Carter electric fuel pump – new July 2019 + Holley fuel pressure regulator

7. Custom ceramic coated headers + Magnaflow muffler

8. 5.5 quart baffled custom oil pan

9. Accusump oil accumulator – 2 quart with electric on/off switch

10. Oil cooler with integral fan (Derale)

11. Custom radiator with switchable fans

12. MSD 6AL ignition system – adjustable rev limiter

13. Distributor converted to Pertronix electronic

14. Ford 4 speed close ratio transmission – professionally freshened - rebuilt

15. Clutch – new - July 2019

16. Currie Enterprises – custom Ford 8.0” rear end (3.80 or 4.11 ratios) – ok to 300+ HP

17. Detroit Tru Trac posi differential

18. Aftermarket rear axles – big bearings

19. Odyssey battery – PC680

20. Master shut-off switch

21. Fuel cells - #2 @ 5 gallons each (Jaz – aluminum - foam filled) + roll-over valve

 

Brakes + Suspension:

1. Wilwood Dynalite – 4 piston calipers F/R

2. Wilwood dual Master Cylinder

3. Wilwood Proportioning valve

4. Sierra Racing rotors (cross-drilled) + Carbotech pads

5. Coilover suspension – front (custom UB Machine) & rear – custom 4 link

6. Adjustable (single) shocks F/R – Spax

7. Corner weights adjusted professionally + alignment.

8. Custom steering (MGB rack) - with quick release Mountney GT wheel

 

Tires & Wheels:

1. 5 - Carroll Shelby aluminum 14 x 6.5 street wheels & tires

2. 4 – Keizer lightweight 13 x10 aluminum wheels mounted with slicks

3. 15 - steel 13” diameter race wheels (various widths) with slicks or treaded race tires

 

Interior:

1. Seats – Kirkey aluminum high-back (driver) + Corbeau high-back (passenger)

2. Harnesses – 5 point – driver (G-Force) & passenger (Impact Racing)

3. Bulkhead with removable cover between passenger compartment and fuel cells

 

Miscellaneous:

1. Full lighting equipment and switches (headlights, parking, back-up, 4-way) + Horn

 

Trailer:

1. Eliminator by Unger & Wilhelm - custom dual axle – 12’ x 6’ bed; 15’ 9” total length

2. Trailer fits in standard garage – garage kept at all times unless in use

3. Tire rack – holds 8 race tires/wheels + spare

4. Front mounted spare tire for trailer

5. Electric trailer brakes

6. 14” trailer tires for lowered loading height

7. Winch with remote control & custom mount

 

Spares:

1. 2 transmissions – professionally rebuilt & not used (plus parts transmission)

2. MSD 6AL – factory rebuilt

3. Muffler – SuperTrapp

4. Gas tank – original custom – 11 gallon

5. Tire insulation blankets – fit over slicks or race tires

6. 4.11 rear end gear (almost new)

7. Seats – low back (need upholstering) – include adjustable seat tracks

8. Emergency brake handle and cable assembly

9. Miscellaneous new gaskets, seals, bearings, thermostats, etc.

10. Starter – new (NAPA)

 

Recent (2019) service:

1. Cooling system flush and refill (October)

2. Oil and filter change – Brad Penn semi-synthetic 10W-30 (October)

3. Brake fluid flush – Castrol GT LMA (July)

4. Differential fluid (July)

5. Compete professional tune-up – including carburetors (October)

 

More pictures & video upon request.

 

1.jpg2.jpg10.jpg3.jpg12.jpg19.jpg38.jpg43.jpg25.jpg55.jpg

4.jpg

Edited by Leoj2006
Link to post
Share on other sites
  • 5 months later...
Guest
This topic is now closed to further replies.
×
×
  • Create New...