Jump to content

Recommended Posts

I currently run this size wheel studs and need to find some longer ones.  I was hoping to use some from ARP but they catalog shows ones which require enlarging the hole in my hubs slightly to accommodate their larger knurl diameter.  I'd rather not do this.  Can any one help me source longer studs for:

- Caterham front hub, aluminum, uprated stub axle

- current ones are 47mm long (under head length)

- need 57+mm length

Link to post
Share on other sites

Try mcmaster.com, belmetric.com or ti64.com. The last one is probably the closest to what you need. You can also try grainger.com or pegasusracing.com

 

Link to post
Share on other sites

I recently needed longer studs as well. The ARP Miata studs I believe will work if I remember correctly. You want to measure the diameter of the part of the stud that goes in the wheel hub. Not all 12 X 1.5 wheel studs are the same diameter on the part in contact with the hub. I went through the Dorman catalog and couldn't find what I needed. I had a lot of hesitation but what I got was good quality from Ebay. they were long studs for a Kia. I cut them with a grinder to what I needed.    

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...