FS: duratec parts, raceline, cosworth, raceco, ect

[seanb]

OK, little history of why these parts are for sale. I have been working on amassing parts for a duratec powered mg midget for a while. I was going to do a restoration on my mk1 midget and do a duratec 2.0 swap. Well, i ended up buying a pretty decent RWA midget that only needs an engine, so im going to be doing a toyota 20v 4age swap instead, much easier and way less cutting/hacking of the shell. I just thought to my self i want to DRIVE a car finally instead of building one for years and years. Anyways, everything i have duratec related must go, i figured you seven guys may want some of this stuff.

 

Jenvey direct to head throttle bodies W/ linkage kit and 40mm horns-$825 SOLD

Raceline duratec 2.0 wet sump kit- $500 SOLD

Raceline duratec R cam cover- $425

Raceco high RPM chain tensioner- $75

Cosworth alternator kit- $475 SOLD

duratec 2.3 ford focus timing cover-$45

EGR blanking plate- $35 SOLD

9.5mm thick steel duratec exhaust flange(comes with new gasket)- $75

 

I will explain each part as best i can. Jenvey direct to head throttle bodies where bought from raceco in the uk about 2 years ago, they come with the throttle linkage kit, instructions, and 40mm air horns. I literally just got in the raceline 2.0 wet sump kit and duratec r cam cover today from the UK. Obviously they have never been used, i just took the out of the packaging to take pics. The receco tensioner was bought the same time the throttle bodies where bought. never used, just taken out of the bag to take pics. The alternator kit was just mounted to my 2.0 engine, never ran or used. It comes with the alternator, pully, engine mounting pieces, and the belt tensioner. the belt tensioner was ground down a bit to work with the throttle bodies. The 2.3 timing cover was a work in progress, i wanted to mil down the engine mount bracket used by the ford focus to make it look neater. It needs to be machined down to look good. Egr blanking plate was ordered from Caterham UK. The exhaust flange was ordered from quad 4 rods. It is 9.5mm's thick and i will include a new exhaust gasket. Feel free to ask any questions you may have. All the prices are with out shipping. I will combine shipping on multiple items. and if i can get it in a flat rate box i will. pictures are in my photobucket album. too many pictures to put here. thanks for looking

Edited November 14, 2012 by seanb

[seanb]

http://s27.photobucket.com/albums/c171/seanbartsch/selling/?start=all

 

link to album with all of the pictures of the parts.

[seanb]

new pricing

 

Jenvey direct to head throttle bodies W/ linkage kit and 40mm horns-$750 SOLD

Raceline duratec 2.0 wet sump kit- $450 SOLD

Raceline duratec R cam cover- $395

Cosworth alternator kit- $425 SOLD

Edited November 14, 2012 by seanb

[blubarisax]

Good price on the alternator kit. I just bought the alternator alone from Cosworth for what you are asking for the whole kit!

[seanb]

thanks, im trying to be fair and give someone a good deal on parts i dont need. I hate to see the parts go, but i want my project to move forward. If i ever finish my mg midget with toyota power i want to do an MGB GT with duratec power. A duratec is a better fit in the bigger MGB than the midget. i will probably end up buying all these same parts again for that! But thats a hypothetical project years away so i would rather have these parts sold and move that money into my curent project.

[seanb]

Sold most of the higher priced items i had, except for the cam cover. i will drop the price further to $375, that's a steal for a nice never used part!