Jump to content

racerlrp

Registered User
  • Posts

    10
  • Joined

  1. I have an unused full height, black powder coated windscreen with carbon fibre motorcycle side mirrors and a carbon center mirror. Windshield wiper motors are installed, wired and switched and I have the wiper blades if one wished to install them. Front tires are Dunlop Direzza Star Spec 195/45/15 and rears are 205's. Front tires were recently replaced while rears are rather slick and will need to be replaced. The rather complex exhaust system was a trial by error solution to meeting 86db sound requirements at Limerock. I could be easily reworked from the collector back to the main muffler to be neater while still retaining adequate attenuation. I do have perforated metal heat shield but just didn't bother installing it. No spare wheel/tire and no spares with the car. Paperwork from Texas Motor Works and registration certificate from state of Maine. Due to be reregistered this month which I'll take care of before sale. I mentioned elsewhere that the passenger seat was cracked and I included a picture of the break. The white stuff around the crack is racer tape glue residue. Seat cracked when my son was driving the car on the autocross course at LRP and I was sitting in the passenger seat and I'm not a big guy. Texas Auto's online price estimator lists the sport seat at 209.66 but I'd call dick to confirm that. Please call 860-318-5501 or robwill2@earthlink.net with further questions.
  2. Sorry, have been very busy and haven't checked into the site in the last week. I will take some pictures on Tuesday and post them that evening. thanks, robert willis
  3. I’ve decided to sell my 2011 birkin s3. Though I have thoroughly enjoyed it I’m in the mood for something different and it represents my car money so it must go. Built by texas motor motors with a stage 2 duratec (dynoed @170 HP at the rear wheels), close ratio gear box, Subaru LSD, carbon fibre front wings, dash, transmission tunnel & boot top. Drivers side roll bar brace/instrusion bar. Birkin sport seats. many nice little details and really cool wheels. Please see current pictures of car below. Car has 4000 miles with a fair amount of track time. Have taken a couple of 200 mile road trips and the car has performed flawlessly. Has carbon rear stone guards but a lot of stone chips where the guards aren’t. passenger seat is cracked but usable for non-track use. needs new rear tires and I will include a set of dunlop direzza star spec rear tires mounted and balanced or that may be negotiated. Everything works but Alternator light is usually on though I’ve had no issues with battery charge. Replacement cost around $44,000 – asking $32,000 or near offer. Please contact Robert willis at robwill2@earthlink.net or 860-318-5501. I’m located in northwest ct. Thanks for looking
  4. I'd still like to go but have a serious conflict with the Alfa Romeo convention in Toronto. Will be driving back from Toronto on Saturday and, assuming all goes well, could drive down to NJMP on Sunday. As I don't have a trailer or tires that like the wet this will be completely weather dependant. I'm an SCDA instructor and can usually squeeze into events at the last moment so will have to play it by ear and probably will do just that. Robert 2010 yellow Birkin stage 2 duratec
  5. I have a yellow & carbon fiber 2010 Duratec Stage 2 Birkin and intend to be there. I live near Limerock in Connecticut and will arrive on my own wheels. Only driven Lightning once and never Thunderbolt. Looking forward to being there and meeting you guys. Robert Willis
×
×
  • Create New...