Early Caterham/Lotus (English Ford) axles, rear end bits, Complete LSD unit, CWP

[craig chima]

Doing some shop cleaning and have the following stuff all related to English Ford rear axles and rear end parts for sale:

 

3.77 Quaife limited slip unit completely set up in Magnesium housing.    Ring and Pinion are in great shape, backlash is to spec and absolutely ready to install.   I used this in my SCCA car a couple of times but it is not a ratio that I will likely use again but is perfect for street use (i.e. lower revs) or track use with low aspect ratio tire.  $1750.00

 

4.11 CWP assembly.   Very nice crown wheel and pinion gear set.   $150

 

Rear Axles and bits for late Lotus 7's or solid axle Caterhams:   Lots of stuff here.   4 axles, all which have been magnifluxed, with outer bearing, steel collar, and housing end cap in place.  Axles also come with cryo treated rear rotors fitted (easily removable if not needed) in case someone was interested in doing a rear disc brake conversion.  Also have 2 bolt on rear caliper brackets, pumpkin seals, and boxes of new bearings, seals, o-rings, etc as seen in the pix.  $500 for all (pretty much a lifetime supply!) or will separate as requested.    All of the above is all track tested and was used on National Championship winning Lotus 7 but I have since converted to a rear axle setup which allows for up to 3 degrees negative camber and so it is extra to my needs.

 

Contact me at (330) 807-0742 or chima97@aol.com.   I have lots more pix of all of the above parts and am happy to send or discuss as requested.  Craig Chima, CC Motorsports, Akron, OH