Fluidyne Aluminum Radiator

[craig chima]

Fluidyne Aluminum Radiator. Measures 13" tall x 17" wide x 2" thick core. Perfect for a 7 or 7 type clone. We have been using this exact same type of radiator in our race cars for many years and this particular one belongs to a customer of mine who is getting out of racing. It has been his spare and he no longer has a need for it. The radiator will fit in a stock location (behind the forwardmost frame tubes) in a "real" Lotus 7, or will also fit in front of the frame as shown in the photos. Outlets are 1.5" and are in the top left and lower right and there is also a 1/8" NPT fitting in the top left (we used for air bleed) and also a 3/8"NPT fitting in the middle right (can be used for water temp sending unit). Works fine on our race motors making in excess of 160bhp without any type of cooling fan, etc and I suspect that it will handle more power than that without any issues. Radiator is in excellent condition with no dents or dings. $200 which is less than half of these units cost new. Craig (330) 807-0742 or chima97@aol.com

[RockyMtnStalker]

Craig,

 

I may be interested in this unit, I will just have to do a few quick measurements. Where abouts are you with regards to shipping distance.

 

Darren

[craig chima]

Darren

 

I'm in Akron, OH, but sale pending as of this afternoon. Thanks to all who inquired thus far. Craig