randy g

Guys I'm a spaz on keyboard,but good with a hammer. I can't post pics of my polished Birkin, but you can see my Decoliner. at Blastolene.com. Randy

Custom fenders any width $ 300 a pair made of aluminum. Any takers !!!! Randy

:seeya: I'm Randy I do custom aluminum work ,fender, noses.etc. I have a all al. Birkin, so I do 7 parts. Go to blastolene.com to see my work, and my latest project i call the "Decoliner". Randy

I can make you fenders out of aluminum in any width,See my work at Blastolene.com. call me 541 474-1071 Randy

I make Aluminum fenders. 541 474-1071 randy

you have a PM form me about these wheels, I am interested. Thanks

Broke lower ball joint today at track. Got it stopped without problem. what is latest fix? randy

Metal Shaping 101 Here is how I make rear fenders. Using .063 aluminum 5052 or 3003 H-14 -- First roll sheet through rollers to curve ,this way edge isn't doing all the work.This puts memory into metal,that it will want to go back to.Full arch unnessary,I go about 2/3 of the way. -- Flatten sheet and brake body flange to 90 degrees. -- Shrink 2" in on outer edge,then 1" in to finnish radius. While also shrinking body flange.This is what shapes fender arch. --Use english wheel to smooth radius edge. 5 degree slope on fender means you start with curved, not square blank.so yes its a problem. Yes! you can do this at home, but most shrinkers have a 1" throat so the radius edge is sharper,the pvc trick is important. Great!! first project, and you can buy a shrinker and do it for about the $250 plus shipping that I will charge for the job. Let me Know.:cheers: Randy 541 474-1071 This message is Blastolene approved!

It's about extremes, big and powerful, vs little, light and fast. Both are fun. My dad and I race the 7 for fun. Just built a high compression zetec and got some webers from Dunell.Built aluminum front and rear fenders for 10" rubber.And am about to make an aluminum nose. I did a wide nose for a friend and it looks cool. So I am going for an all aluminum Birkin with 200+ hp. Started motor last week! First Auto-x in 10 days,mine will not be the only new car. There should be 2 new Stalkers and my friend built a LS powered wide body 7. So any one want to visit so.Oregon we have a great track we run on. That's my story , the Blastolene 7 Guy Randy

I can make any thing. Go to Blastolene.com for pics. of my work. By chance I am making rear fenders this week for my car to fit 10 wide tire. What do you need? Randy

:willy_nilly: I am a metal shaper. I have done a widened 7 nose out of aluminim for a friend of mine. I am about to make a nose for my Birkin. To see my work go to Blastolene.com I can use your widened mock-up as my pattern and will basicly cover with .062 aluminum. Randy

That $169 is for a 17" long case 4.5 O.D. 3" in-out, Lee also said a 22" is made for $179, and $10 more for a stainless case!! I like the 22" w/3"in-out stainless for $189. and run no guard becuase outer case stays "cool".This is an all stainless glass pack looking unit I aready have some 3" stanless tube form another project, so all I need is a 3" stailess U-bend and buff-buff woo woo, Randy

So what size do we want guys? 3'in-out 30" case? sound about right, I called Flowmaster but Lee was not there. Randy

well Dick Brink just sent a Beautiful clutch type posi for my Birkin. Looks really nice! Just waiting on new bearings, This is not a Quaffe, he said this is what is currently available,at a better price!

what dia. are you guys using, I race my car and currently have a 2" system. Currently up grading zetec with webers and stage 3 cams and p&p head,was thinking about going to a 2,5" system. Any one else using 2.5" Randy