Ricwilpipe Posted December 31, 2021 Share Posted December 31, 2021 Race car project need an aluminum hood for a 1500 non xflow would prefer louvred and not painted Brian Link to comment Share on other sites More sharing options...
SevenAmerica Posted January 10, 2022 Share Posted January 10, 2022 Hi Brian, I have two ex-race car bonnets available… bare Ali, no louvres, one with a scoop opening one side. Are your dimensional requirements for standard S2 Lotus Seven? I’m an hour from Detroit, so a handoff might be possible depending where you are… Link to comment Share on other sites More sharing options...
Ricwilpipe Posted January 14, 2022 Author Share Posted January 14, 2022 Waiting for your reply. pictures cost deltapipe@aol.com Link to comment Share on other sites More sharing options...
SevenAmerica Posted January 14, 2022 Share Posted January 14, 2022 I always prefer to trade for other lotus Seven parts... if you have any old bits you've taken off during a restoration, I'm interested! Turns out I only have the one. See photos... 37" front edge to back edge at centerline. Looks loose-ish on my own '61 Seven, but may cinch down more tightly with properly placed catches. Link to comment Share on other sites More sharing options...
Ricwilpipe Posted January 16, 2022 Author Share Posted January 16, 2022 Alright 37” will work looks a little tired I have the original radiator. Just been hot tanked tested and painted. Also ali tubes for soft top. what you think? Link to comment Share on other sites More sharing options...
SevenAmerica Posted January 17, 2022 Share Posted January 17, 2022 Could you post a photo of the radiator, showing the manufacturers tag (Serck) if it had one? If it’s a genuine old radiator, I’m interested in it - and the hood sticks too. I think that would be a fair swap. Link to comment Share on other sites More sharing options...
Ricwilpipe Posted January 18, 2022 Author Share Posted January 18, 2022 I can’t seem to attach pics. Let’s take our discussion to emails. I’ll have a better chance of getting it right Home locations is near Toronto deltapipe@aol.com Brian Link to comment Share on other sites More sharing options...
JohnCh Posted January 18, 2022 Share Posted January 18, 2022 @Ricwilpipe see the first two items in this FAQ that cover how to post photos. If you are still having problems, please send me a PM and I'll try to help. Thanks, John Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now