slngsht Posted May 25, 2009 Author Posted May 25, 2009 rob, what do you mean by another notch at the end?
slngsht Posted May 26, 2009 Author Posted May 26, 2009 New bracket... I do still need to space the heim a little bit so it won't have interference from the bracket.
solder_guy Posted May 26, 2009 Posted May 26, 2009 rob, what do you mean by another notch at the end? You know .. the rack has notches in which the pinion gear interacts .. when it gets to the last notch .. it has hit the limit of the turning radius. Rob
TheDingo8MyBaby Posted May 27, 2009 Posted May 27, 2009 You know .. the rack has notches in which the pinion gear interacts .. when it gets to the last notch .. it has hit the limit of the turning radius. Rob Actually, the limit will comes from the iner tie rods hitting the rack. Manufacturers usually cut a few extra teeth in the rack so that it doesn't marr the gear. You may be able to add a lock washer or two between the inner tie rod and the rack to gain some steering angle. You just want to make sure the ID of the lock washer fits on the thread and the OD isn't bigger than the steering rack OD. On my corolla it's 14mm lockwashers.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now