Canadian 7 Posted June 20, 2020 Share Posted June 20, 2020 Has anybody replaced the speedometer seal on a Type 9 transmission without removing the speedo gear? On a Superformance S1 they have an access door in the tunnel for the fill plug but not for the speedo gear plug so it’s pretty tight underneath. Thanks, Ron. Link to comment Share on other sites More sharing options...
S1Steve Posted June 20, 2020 Share Posted June 20, 2020 I pulled out the transmission tunnel, It was worth it. It’s pretty easy to pull it.. Link to comment Share on other sites More sharing options...
papak Posted June 20, 2020 Share Posted June 20, 2020 (edited) It’s a pain in the ass to extract the old seal without removing the tailshaft but I guess it could be done. I would remove the tail shaft housing. The gear itself can easily be tapped off the shaft and the remaining side shaft punched out of the tail shaft housing. You can get the correct plug from Chris at BGH Geartech In England. PM me for more info. I recently did this during a rebuild. Edited June 20, 2020 by papak Link to comment Share on other sites More sharing options...
Canadian 7 Posted June 26, 2020 Author Share Posted June 26, 2020 I pulled out the transmission tunnel, It was worth it. It’s pretty easy to pull it.. Doesn't the Whole interior have to be taken out to do this? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now