Grady Posted January 12 Author Posted January 12 (edited) I have the CF on order so I went ahead and utilized my masters I have in CAD design this weekend. This way I can get my layout figured out prior to doing the cutting on the CF sheet. I found some different switches for the lights that will simplify the layout. In removing all the breakers this is going to make the right side empty. This will be a good place to mount the holder for the Garmin Catalyst. Tried to take the picture from where my eyes will be. Edited January 12 by Grady
Grady Posted January 12 Author Posted January 12 1 hour ago, bball7754 said: CAD = Cardboard Aided Design? 😊😊 You know. It! 1
Grady Posted February 3 Author Posted February 3 Got the rough cut done and the attachment screws drilled. Now a lot of sanding to get a good fit. 1
Grady Posted Monday at 01:29 AM Author Posted Monday at 01:29 AM Have the mounting done of the ADU5. Basic power and ground hooked up. Running wires for oil pressure, coolant temp. Need to get all the sensors installed and wired in. But working on the basic programming/layout of the display. Here is what I have so far. 1
nc7s4 Posted Monday at 01:48 AM Posted Monday at 01:48 AM Love it. Still space for the fire bottle pull handle right in the middle. Are you planning to race it?
Grady Posted Monday at 02:53 PM Author Posted Monday at 02:53 PM 13 hours ago, nc7s4 said: Love it. Still space for the fire bottle pull handle right in the middle. Are you planning to race it? No racing for me. I will track it. Thinking this would be a good one to do some Autocross. Never done that before.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now