Lotus Seven TR10 Rear Axle Housing and Differential

[dssbrown]

For Sale;  Early Seven TR10 Rear Axle Housing and 4.55:1 Differential.

                 Originally from a 1960 Seven Series 2 America.  $750/OBO.

                 

                Early Reinforced Toyota Corolla Rear Axle suitable for use in a Seven S2 or S3.  

                Reinforced Axle Housing.  $1750/OBO.

 

 

Doug Brown

Alton Bay, NH 

              

[IamScotticus]

What's the lug pattern on  the Corolla?

[dssbrown]

The Corolla lug pattern has a PCD of 110 mm and the studs are M12.

Will likely need a set of wheel adapters.

[dssbrown]

Also, for the Reinforced Toyota Corolla Axle the rear end ratio is 4.2/1.

The width of the axle from drum face drum face is 51".

It is a great substitute for the fragile TR10 rear axles.

 

[Marek]

110mm or 114.5?  The axle in my Rotus is from the Celica-Supra and definitely 114.5mm.  I'd be surprised if Toyota was dabbling in multiple wheel patterns.  The good news is 114.5 gives you plentiful options.

[dssbrown]

My axle is also from Chris Custer at Rotus!  

It was from a Toyota Corolla and depending upon the specific model could be a 110 or 114.5 PCD.

My initial measurement was 110mm.

However, I will double check measurement.

[dssbrown]

The Corolla Lug Pattern is definitely 4 x 100mm  PCD with M12 studs.

Doug Brown

[SevenAmerica]

Doug, would you sell the 4:55 diff separately?