dssbrown Posted June 2 Posted June 2 For Sale; Early Seven TR10 Rear Axle Housing and 4.55:1 Differential. Originally from a 1960 Seven Series 2 America. $750/OBO. Early Reinforced Toyota Corolla Rear Axle suitable for use in a Seven S2 or S3. Reinforced Axle Housing. $1750/OBO. Doug Brown Alton Bay, NH
dssbrown Posted June 3 Author Posted June 3 The Corolla lug pattern has a PCD of 110 mm and the studs are M12. Will likely need a set of wheel adapters.
dssbrown Posted June 3 Author Posted June 3 Also, for the Reinforced Toyota Corolla Axle the rear end ratio is 4.2/1. The width of the axle from drum face drum face is 51". It is a great substitute for the fragile TR10 rear axles.
Marek Posted June 3 Posted June 3 110mm or 114.5? The axle in my Rotus is from the Celica-Supra and definitely 114.5mm. I'd be surprised if Toyota was dabbling in multiple wheel patterns. The good news is 114.5 gives you plentiful options.
dssbrown Posted June 4 Author Posted June 4 My axle is also from Chris Custer at Rotus! It was from a Toyota Corolla and depending upon the specific model could be a 110 or 114.5 PCD. My initial measurement was 110mm. However, I will double check measurement. 1
dssbrown Posted June 7 Author Posted June 7 The Corolla Lug Pattern is definitely 4 x 100mm PCD with M12 studs. Doug Brown 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now