westfield sei spa clutch

[mac w]

Hi,,does anyone know where to find a clutch assy for my westie Xflow with a T9 5speed ?

[JohnCh]

Sounds like you have one of the Yarwood-era cars. As far as I know he didn’t do anything oddball with his installations, so it should be the same as what the Caterham guys are running. If no one chimes in with a good source, then I’d start with Dave Bean Engineering and RD Enterprises. They can probably help out or steer you in the right direction.

 

-John

[mac w]

thanks I tried your idea but got no reply from my emails the clutch is a 7.5' disc with a bolt pattern on the flywheel of 8.75" probably a discontinued pinto clutch

[JohnCh]

Check out this thread. Might be worth contacting Dick Brink, or perhaps PM'ing Southwind25 to see what he finally did for his car.

 

-John

[DB6]

Email is not the fastest at Dave Bean, I would call them on 209-754-5802 .

 

Dick Brink is another good option.

 

I do not think you should have too much of a problem getting what you need.

[mac w]

I have more info .I have now got a clutch.The disc and pressure plate are from a 1973 Pinto and the release bearing is from a Mercury Capri from about 1978 through 1984 . Hope this helps with any future problems.