Finished bobbing my 1970 Deuce & 1/2

[Hank]

I finished the major portion of bobbing my 1970 deuce & 1/2. Put a custom 8" frame lift, 53" tires, 2-piece HEMTT wheels, M105A2 trailer bed, custom stainless brake lines, LED f/r/headlights. Next up is to install a custom power steering kit, under dash military A/C & heater kit and PAINT IT!

 

http://www.hanksdeuce.com/images/bobbedwithexped.jpg

 

http://www.hanksdeuce.com/images/07side.jpg

 

http://www.hanksdeuce.com/images/08corner.jpg

 

Front & Rear frame cover plates:

http://www.hanksdeuce.com/images/IMG_1329.jpg

[MHKflyer52]

Hank that is one hell of a tow car for your 7 or any other car.....:jester:

It already has AC I thought....windshields open out.....and as for a heater dose the engine not put out enough heat......:smilielol5:......especially on the passangers side foot well due to the exhaust routing.:jester:.

[bsimon]

Air-O-Matic power steering, or something more elaborate?

[Hank]

Air-O-Matic power steering, or something more elaborate?

 

I went with a totally different steering box mounted on the outside of the frame with ports for a 5 ton power steering pump. The system was purchased from Waterloo Specialties LINK HERE. I didn't want the danger of a true hydraulic steering having a double acting ram because if one of the lines comes off then you can't steer. The air-o-matic isn't made anymore and it is hard to find a kit. This system is just like my 2003 Ford Expedition, only larger.

[bsimon]

The Waterloo system looks like a nice bit of kit.

[Hank]

The Waterloo system looks like a nice bit of kit.

 

Wait until I put the A/C & heat kit in the deuce.

[WestTexasS2K]

That's on my bucket list of vehicles. I would like to put air ride suspension on one. Keep us posted on the progress.