dvl Posted January 9, 2015 Share Posted January 9, 2015 (edited) Hi All, I have the following parts for sale, that will not be used on my Seven. Thanks for looking. Please PM me, with any offers. Thanks again, Dave 1 pair of Tillett B6 seats, carbon fiber over GRP, with trimmed edges and Dinamica panels and mounts. $1000/OBO + shipping The seats include one pair each of Caterham fixed mounts and sliders. The seats and rails are unused, other than for test fits in the car. One seat has additional trimming at the upper edge, as is visible in the image. The edge is sealed off with Hysol HP120 adhesive. Retro Ford Ltd Type-9 gearbox hydraulic release bearing kit. New and used only for test fitting. $100/OBO + shipping http://www.retro-ford.co.uk/shop/content/type-9-rocket-hydraulic-clutch-release-bearing-kit-bc002 Also included are 6 spacers, a braided Teflon supply side hose, a adapter for a remote bleed hose, and an adapter for use with a 7.25 diameter Tilton style race clutch. Stack Pro-Control programmable fuel level gauge. New and unused. $100/OBO + shipping Tony Weale book: Lotus Seven Restoration, Preparation, and Maintenance. $100/OBO + shipping Used but in good condition. I have 2 copies, so I am selling one. Edited January 10, 2015 by dvl Replace pictures Link to comment Share on other sites More sharing options...
dvl Posted January 9, 2015 Author Share Posted January 9, 2015 (edited) Weale book Thanks Dave Edited January 10, 2015 by dvl Replaced Pictures Link to comment Share on other sites More sharing options...
Davemk1 Posted January 10, 2015 Share Posted January 10, 2015 Do you have any photos of the seats you can share? dave Link to comment Share on other sites More sharing options...
dvl Posted January 10, 2015 Author Share Posted January 10, 2015 Can you not see them in the message? They show up for me. I also created a public gallery in the profile, showing the pictures. Thanks, Dave Link to comment Share on other sites More sharing options...
dvl Posted January 10, 2015 Author Share Posted January 10, 2015 Hi Dave, I will also add additional images of the seats, if you want to see more detail. Thanks Dave Link to comment Share on other sites More sharing options...
xcarguy Posted January 10, 2015 Share Posted January 10, 2015 No photos in the message for me either. :rofl: Link to comment Share on other sites More sharing options...
dvl Posted January 10, 2015 Author Share Posted January 10, 2015 The images should be visible now, as attachments. For some reason the public album pictures are not visible. I'm going to assume user error... Thanks again for looking, Dave Link to comment Share on other sites More sharing options...
TurboWood Posted January 10, 2015 Share Posted January 10, 2015 Hi Dave, I'll take the hydraulic release bearing so long as it works with the Caterham master cylinder (I assume it does). Daniel Link to comment Share on other sites More sharing options...
dvl Posted January 10, 2015 Author Share Posted January 10, 2015 Hi Daniel, The release bearing is set up for a .625 master cylinder piston diameter. My plan was to use it with a standard Girling master cylinder, as used on most Seven type cars. To verify that it will work in your system, it might be worth emailing Dave Coolridge at Retro Ford. The time I contacted him, he replied pretty quickly. Thanks, Dave Link to comment Share on other sites More sharing options...
MK1962 Posted January 10, 2015 Share Posted January 10, 2015 If Daniel doesn't take the clutch release bearing I will Thanks Marshall Link to comment Share on other sites More sharing options...
Davemk1 Posted January 10, 2015 Share Posted January 10, 2015 PM sent. dave Link to comment Share on other sites More sharing options...
drew... Posted January 10, 2015 Share Posted January 10, 2015 Dave - PM sent Link to comment Share on other sites More sharing options...
dvl Posted January 11, 2015 Author Share Posted January 11, 2015 There are have been a few questions regarding the additional trimming I performed on one of the two Tillett seats. I believe I emailed additional pictures to everyone who asked, but I'll post them here as well, just in case in missed someone. The "in-car" photos were taken before I sealed the edge with adhesive. The seats fit in my Seven without the added trimming, but removing the extra material allows for more fore and aft range of motion. Thanks, Dave Link to comment Share on other sites More sharing options...
dvl Posted January 11, 2015 Author Share Posted January 11, 2015 The Tillett seats are sold. Thanks for all of your interest. Dave Link to comment Share on other sites More sharing options...
Innominatus Posted January 12, 2015 Share Posted January 12, 2015 dvl: I'd be willing to take the Tony Weale book. PM forthcoming... Link to comment Share on other sites More sharing options...
dvl Posted January 12, 2015 Author Share Posted January 12, 2015 The Tony Weale book is sold. Thanks, Dave Link to comment Share on other sites More sharing options...
dvl Posted January 14, 2015 Author Share Posted January 14, 2015 The hydraulic clutch release bearing kit is sold. Thanks, Dave Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now