Vinman1 Posted June 9 Share Posted June 9 Looking for center caps for KN Wheels like these... Link to comment Share on other sites More sharing options...
Vovchandr Posted June 10 Share Posted June 10 These? https://www.ebay.co.uk/itm/361739457589?epid=1542750106&itmmeta=01HZZWB0GSJHSRSE1AV6EAP1D4&hash=item54395a1435:g:LRYAAOSwD1Jk5F4b&itmprp=enc%3AAQAJAAAA4L7Dx--7AGY27DkUMon1YBEukgTbi4aSKoJtxLPD4sOl7qUDcCsWXEfr9JtLgfi8SAy0vMHSEFuhUrFqY3Nb3%2BfzlkpDvBIr6S369dxXk6Ryf0ff2VGNZNULUVACVH2lOzq3RkQ8tPGalgkGDkK6C2YqMeNKuf7vNl3j1ZqVjQUSohaMpcMdh5I2y8Hy83TkSu4WkS74x%2FjX1bpeZdKauzSKHFaT2Hi3jaQVoQLvFHq%2Boo3VpALp5unOTrWcAeZI%2FViogAFYBHaRISG0PjhDhUZnni6iGkEBNvl61r%2BOeJ7e|tkp%3ABk9SR8aIrPz_Yw Link to comment Share on other sites More sharing options...
MV8 Posted June 10 Share Posted June 10 Vin, are you looking for the center cap that attaches to the wheel or the cosmetic disc that attaches to the center cap? KN made a number of wheel models that may share center caps but you should measure the size of the hole in the wheel or the cap you have. Monitor caps are available but these are Jupiter wheels. Link to comment Share on other sites More sharing options...
Vinman1 Posted June 10 Author Share Posted June 10 MV8, Vovochandr, I am looking for the Cap not the badge. By Cap, I mean the Aluminum cup, a bit bigger than a shot glass, that presses into the wheel center from the rear. The four that came with the parts from Lar's barn had Goodyear badges on them, I changed them to the Seven ones above. One of mine got dented, and over the weekend another Seven owner I know had a rear wheel come off while driving and bent an axle, tore up a wing, and damaged the center cap, but thankfully, neither he nor his wife were hurt. He has all the parts to fix except the cap. Link to comment Share on other sites More sharing options...
MV8 Posted June 10 Share Posted June 10 (edited) Looks like it would be easy to dent with a leg wrench. I'll look for something similar but you may need to change them all if there is no identical match available. Need the wheel bore size. EDIT: May fit but plastic snap-in with a 2.5" hole in the rim: https://www.demon-tweeks.com/us/caterham-wheel-centre-cap-cat77295/ https://www.demon-tweeks.com/us/caterham-alloy-wheel-centre-cap-badge-cat77295badge/ Edited June 10 by MV8 Link to comment Share on other sites More sharing options...
Vinman1 Posted June 10 Author Share Posted June 10 Hole in KN Rim is 3" dia Link to comment Share on other sites More sharing options...
MV8 Posted June 11 Share Posted June 11 (edited) Is it 3.00"/76.2mm with a caliper or is it 3 inch with a tape measure? It makes a difference in how well they stay on if all you can find are snap-in. https://www.rhinotuning.com/collections/size Edited June 11 by MV8 Link to comment Share on other sites More sharing options...
Vinman1 Posted June 11 Author Share Posted June 11 MV8, As always great source from you! I will re-measure with a caliper, but looks like Rhino has something very similar... Cheers, Vin 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now