rv-4mike Posted December 20, 2006 Share Posted December 20, 2006 I just found this forum and spent the last couple hours looking around. In the market for my next project car and looking for some input. I'm looking at a couple of options: 1) My first choice is the Ariel Atom, but this car is really out of my price range. Beautiful car with awesome performance. A modern day incarnation of the Seven. Too bad they are so pricey. 2) A Factory Five Cobra Replica. More affordable and also beautiful cars. I have a friend that has one. Not the most comfortable car around. Rides like a truck. Everybody and his brother has one. 3) WCM Ultralight. Quirky looks but I think I like it. Havent seen one in person though. Engineering looks almost comparable to the Atom for considerably less $, but still pricey. 4) Stalker V6. From what I can tell, engineering looks a little more simplistic than the WCM, but the car performance looks pretty good. I like the look though the wheelbase appears to be a little longer than a typical Seven replica (or maybe just the pictures I've seen). Looks like good bang for the buck. Can anyone here give me some input here on the Seven clones? How do they compare to one another? How do they compare performance wise to a Cobra replica? Any feedback would be appreciated on the cars or on the companies that produce them. This seems to be a forum for all Seven's and I dont want to be responsible for pitting one against the other so feel free to PM me if you prefer. Thanks. Link to comment Share on other sites More sharing options...
Boxologist Posted December 20, 2006 Share Posted December 20, 2006 i am offering advice to a coworker of mine to to a FF build since he is too big to fit in a 7. i believe that FF has updated their unit to accept the previous mustang. if its possible to slip an SVT supercharged Cobra drivetrain in there, it should have the performance to back up the looks. Link to comment Share on other sites More sharing options...
locostv8 Posted December 20, 2006 Share Posted December 20, 2006 Much depends on your budget, skill level, timeframe, wow level, etc... I'm 6'5" 230lb and am building a Locost with a 392(351) and intend to have well less than the kit cost in the whole car. The resulting car will have 500+hp 4wdb, ABS, IRS, PS, crusie, etc and weigh about 1400lb. You might do some lurking on http://locostusa.com/forums/index.php. http://wrangler.rutgers.edu/gallery/d/36857-5/First+Run+Lotus7+022.jpg 1250lb LC7 with 302 & T5locostv82006-12-20 01:08:33 Link to comment Share on other sites More sharing options...
Al N. Posted December 20, 2006 Share Posted December 20, 2006 Mike- Welcome to the forum. While I think many of us folks here have a bias toward the last 2 cars on your short list, a few have actually run their LSiS (Lotus Seven inspired Sportscars) alongside Cobras in the Run and Gun competition. They'll find this thread and chime in soon enough, I'm sure. -Al Link to comment Share on other sites More sharing options...
powderbrake Posted December 20, 2006 Share Posted December 20, 2006 rv-4Mike: I went through the same series of questions myself when I decided to build a kit car. I agree there are lots of cobras out there. It is a great car, but in an entirely different category. It's a big honkin V8 and has the weight and size that goes with that. Since you are looking at the Ariel, WCM and Stalker, it sounds like you are looking for something smaller and more nimble. That is the esssence of a LSiS ( Lotus Seven inspired Sportscar) I have an Ultralite, and have run against Cobras on the track, and can stay with or beat many Cobras in the twisties. When you hit the straight however, the horsepower and aerodynamics of the Cobra give them the advantage. I have seen a lot of Ultralites and Stalkers beat Cobras in the 1/4 mile at Run N Gun. My Ultralite with street tires turns a 12.6 second quarter ( when I do it right) and that's faster than a lot of Cobras and my 1998 Corvette. It's also slower than some other Ultralites, and some of the Supercharged Stalkers. Basically a LSiS vehicle is a race car in disguise, and when you put an engine in the 200+ hp range in it, it becomes a giant killer. Some of the cars on this forum with v8's in them must be mind boggling. You also listed them in approximate order of cost. The Ariel is in the statosphere, the Ultralight and the Stalker are much more reasonable. The Locost route is probably the lowest cost approach, but probably requires the most work and know-how. You didn't mention the Caterham and Birkin, but they are available. They are the closest to the Lotus in appearance and construction, and the Caterham has the same DNA as the Lotus 7. The Caterham is also pricey. You can buy a finished Ultralite for less than a Caterham kit less drivetrain. The other options include the bike engined cars. I suggest you spend some time looking at the various cars . SIT in them!!!! How does it feel? There is a big difference in room in some of the cars. My Ultralite and the Stalker are 4 to 6 inches wider than a Standard Lotus, Caterham or Birkin. Contact the various owners here on the forum. Look at their cars. Ask them about the construction process/problems. Look at how the car is constructed, how the parts fit, how the engine, transmission, differential is mounted. How big is the gas tank? Look at the shocks, how the springs are adjusted. Look at the upholstery, the dash, the instruments. I also suggest you ask yourself the following: What do I want to do with the car? Cruise? travel? autocross? race? show car? Do I want to build or buy a car? How much work do I want to put into building the car? How much do I enjoy tinkering with the car after it's done? Is it reliable? Where do I get spare parts for the car? What do I do if it rains? The only car I can tell you a lot about is the Ultralite, and will do so if you give me a call. E mail me at geddens at charter dot net, I'll give you my phone number. Let us know where you live. The guys on the Forum can hook you up with Se7en owners near you and you can evaluate the cars. I will check to see if I can find an Ultralite near you. The other places to see se7ens are the Kit Car show in Carlisle PA ( held in the fall) and there will be 77 se7ens at Tail of The Dragon on 7/7/07. >7's at ToTD Also click on the LINKS just below the pictures of the cars at the top of the page, for links to the manufactures web sites. The Se7en is a terriffic choice, it is a fun car, and can fulfill all your dreams. Link to comment Share on other sites More sharing options...
slngsht Posted December 20, 2006 Share Posted December 20, 2006 As others have said, Cobras and 7s are both tons of fun - in different ways. I drive by an exotic car place on the way to work, and they have 2 cobras sitting there. They are - beautiful. I wouldn't mind having one at all. You should also look in the used market. 20K will buy you a decent cobra or seven. Link to comment Share on other sites More sharing options...
rv-4mike Posted December 20, 2006 Author Share Posted December 20, 2006 Guys, Thanks for the input to date. A little further information about me. I'm just finishing construction of a home built airplane (an RV-4, duh) and looking for my next tinkering project. My last project car has been a few years back. Was a Datsun 260Z with Chevy 383 power. So I am capable of building a car. I have a good friend who just finished an FFR Cobra. A pure donor build with stock 5.0 EFI and T5 tranny. I love the look of the car. But seating is very uncomfortable on both sides due to the cant of the seats and width of the trans tunnel. Steering and brakes are very heavy and rides like a buckboard. I'm still tempted based on the looks and performance, but less than enthused with the heavy steering, etc... My daily driver is a 91 Toyota MR2 turbo which is the funnest car I've ever owned. After driving the MR2 for 15 years I'm pretty sold on the small light car concept (not that the MR2 is all that light, it just feels light if you know what I mean). Finally, some of the engineering on the FFR strikes me as a little crude or compromised in order to work with the donor Mustang parts. I didnt seriously consider a Caterham for the money I could get the Atom and that would be no contest. Dont know about the Birkin. I've seen a couple but hadnt really thought much about them. I've also looked at the Locost route. Maybe somewhere in the distant future, but at this point its more work than I want to get into. Not that I couldnt do it, just not the right project at the moment. The Stalker looks good and performance looks good as well. I'm having a hard time with the idea of a small sports car that uses S10 donor parts. Seems to me to be pretty crude, but if it works who am I to argue? Due to the cost and claimed performance, I havent ruled this out as a contender. But I'd like to see one in person. The Ultralight is the car that is really appealing to me at the moment. Primarily because it strikes me as being closest to the Atom in concept, engineering, and execution. I'd love to see (and take a ride) in one if there is one somewhere in my part of the world. Call it a personality quirk, but I dont like to do the same thing as everyone else. That's part of the problem for me with the Cobra, everyone has one. I've been going to the Knotts kit car show the past couple of years. Last year there were about 80 Cobras, about 4 Porsche Spyder replicas, 2 LSIS. If I do decide on a Cobra it will probably be Chevy powered (my buddy wont even speak to me if I do that). My airplane that I am just completing has a Mazda rotary engine in it. I guess, bottom line is I do need to get a close look at a couple of the LSIS, try them on for size, and try to snivvel a ride or even drive one or two. Only time I've ever been in one was at a car show where Superformance had one they were trying to sell. But couldnt drive it. In hindsight should have bought it (I later heard that they practically gave it away because they couldnt sell it - everyone wanted their Cobra kit). I do have a friend of a friend who has a pretty serious Caterham that he auto crosses. Maybe I can get a ride with him. But as you pointed out, the Ultralight is wider (and presumably more comfortable) than a Caterham so I guess that wouldnt be all that helpful. Oh, uses. I'm looking for a car to cruise the backroads primarily. Something to replace my motorcycle (I'm getting to old for that). My guess is that in any street based comparison the smaller lighter cars like the Ultralight and Atom would eat a Cobra for lunch unless the Cobra was pretty seriously built. In fact probably on most race courses as well, unless the course was big with lots of straights like Willow Springs. I doubt I'd race it - thats not my thing, though I might be tempted once I own a car that is capable. And I'm located in San Diego, Ca. Thanks for the offer to contact you directly. I'll try to do that tonight. I did read the article about your car that is linked from the WCM website, but I would like to know more. Link to comment Share on other sites More sharing options...
rv-4mike Posted December 20, 2006 Author Share Posted December 20, 2006 I should have mentioned. I'm also partnered on a flying airplane, so I can pretty easily get around the southern cal, arizona area to get a look at a car if need be. If it's the right car it would be worth the trip. May even be willing to trade an airplane ride for a ride in the car. My flying airplane is an Rv-6A. The RV series are pretty comparable to the LSIS concept - 2 seats, small light, great handling, etc... Link to comment Share on other sites More sharing options...
slomove Posted December 21, 2006 Share Posted December 21, 2006 There are a bunch of Se7eners in SoCal (including myself in Pasadena with a Birkin) but just so in San Diego. Post on www.californiacaterhamclub.com (it is marque-inclusive, not just Caterham) and you will get lots of opportunity to sit and drive in various Se7ens (mostly Caterham, Birkin and Locost, probably no local S2k or Stalker). Gertslomove2006-12-21 02:19:59 Link to comment Share on other sites More sharing options...
rv-4mike Posted December 21, 2006 Author Share Posted December 21, 2006 Another option to consider. I just was looking at the Deman 7. Does anybody have any info or input? The website is really clunky and doesnt provide a lot of information about what's involved in building the car, what components are used, etc... I want to know more. It looks like some pretty good workmanship from what I can see on the website. And looks like pretty good bang for the buck as well. Also, anyone here have experience with the bike powered variants? The Hayabusa certainly is a powerful bike engine. Not sure how practical it would be as a street driven car, but sure would be different! I think I like it. Inputs please! http://www.usa7s.com/aspnetforum/images/emoticons/biggrin5.gif Link to comment Share on other sites More sharing options...
slngsht Posted December 21, 2006 Share Posted December 21, 2006 Mike, for questions on Deman, drop a line to Dino at grkmf3@comcast.net As for a bike engined car (BEC), please see >this. There is no shortage of opinions http://www.usa7s.com/aspnetforum/images/emoticons/smile5.gif Link to comment Share on other sites More sharing options...
Deman USA Posted December 22, 2006 Share Posted December 22, 2006 Hello everyone. My name is Dino, my friend Paul and I are the North American dealers for the Deman 7's. Like slomove posted, the website is kind of clunky, and is brief. We just got in with Daniel Mann, the founder and builder of Deman-Motorsport, and will be recreating the site. As far as the workmanship, he is unbelievable at what he does. You should just take a look at his A-arms that he creates and how incredible the are. We are actually introducing a new line of 7's that are a wide-body version, and will have a Nissan powerplant. The advantage of the Nissan powerplant over the bussa, is more hp along with alot, and i mean alot more torque. The car looks amazing, and has alot of new features. If your in the market for a new 7, and dont want to spend the big bucks on a Caterham or a Birkin, then just give me a call at (224)-612-1320 or email me at grkmf3@comcast.net and i will give you specs and alot more info on the Deman SR27's. Thanks agian, and hope to see and meet all of you at the Tail of the Dragon where you will be able to see a very powerful, fun, and reasonably priced work of art in action. Happy Holidays, Dino Link to comment Share on other sites More sharing options...
rv-4mike Posted December 22, 2006 Author Share Posted December 22, 2006 Dino, Sent you an email for more info. Can you post a little more detail on the Nissan powered variant and reasons for choosing that engine? Which Nissan? Power? I really like the WCM at this point, at least in part for the S2000 power. I'd like to get big HP without having to go to extreme mods, and without having to go to more than 4 cylinders. My benchmark is the 300HP Ecotec powered Ariel Atom. My preference in power would be Toyota or Honda based on my experience with those makes. Although I think a tricked out Mazda rotary would be pretty cool in one of these cars also! http://www.usa7s.com/aspnetforum/images/emoticons/biggrin5.gif Link to comment Share on other sites More sharing options...
PAULDEMAN Posted December 22, 2006 Share Posted December 22, 2006 Hello everyone. This is Dino's partner Paul. To answer rv-4mike's question as to which Nissan powerplant we will be using, it will be the SR20DET. If you are not familiar with these engines they are 2.0L 16 valve turbocharged engines that rev to 7,500 and make over well over 200hp stock. We will be selling built versions with over 300rwhp. It all depends on what the customer wants. The cars will be called the SR27 (SR20DET+SUPER 7=SR27). These cars are still being developed right now. We hope to have complete cars in early February. We feel that this powerplant will be the perfect motor for these cars. They produce a lot of power and have the great engineering and reliability of Nissan motors. There is not any information about these cars on the website because they are still being developed but you can give either Dino or I a call at (312)804-3839.PAUL@DEMAN2006-12-22 12:36:44 Link to comment Share on other sites More sharing options...
rv-4mike Posted December 22, 2006 Author Share Posted December 22, 2006 What Nissan car does that motor come from? Link to comment Share on other sites More sharing options...
Deman USA Posted December 22, 2006 Share Posted December 22, 2006 The SR20DET motor comes from the very well-known Nissan Silvia. If you know what the Silvia is, and is pushed to do, then think of what the 7 can do with this bad boy in it. Link to comment Share on other sites More sharing options...
BusaLoco Posted December 23, 2006 Share Posted December 23, 2006 Hi Mike, I own, and have built (well assembled) a Busa Powered Deman SR7. ... See my ride pics http://www.usa7s.com/forum/forum_posts.asp?TID=358 . My Deman kit was complete, on time and a real good bang for my buck. ... No complaints and Daniel Mann is very accomodating with constructo-newbie questions! To check out Dan's site ... (I think it works quite well) ... http://www.deman-motorsport.com/ . The car's focus leans more to track use than a road car and so some of the creature comforts (a la Caterham) don't exist ...ie fiberglass seats not leather, etc. The degree of finish is left in your hands but I have to admit that it has been a real pleasure to add the finishing details the way that we like them. Hope this helps! BusaLocoBusaLoco2006-12-23 10:25:51 Link to comment Share on other sites More sharing options...
Deman USA Posted December 23, 2006 Share Posted December 23, 2006 We will have options on our Deman SR27 just as the Caterhams do. And dont be suprised to see Deman Motorsport on the Caterham, Ariel level pretty soon. http://www.usa7s.com/aspnetforum/images/emoticons/coolgleamA.gif Link to comment Share on other sites More sharing options...
slngsht Posted December 23, 2006 Share Posted December 23, 2006 We will have options on our Deman SR27 just as the Caterhams do. And dont be suprised to see Deman Motorsport on the Caterham, Ariel level pretty soon. http://www.usa7s.com/aspnetforum/images/emoticons/coolgleamA.gif The more the merrier Link to comment Share on other sites More sharing options...
rv-4mike Posted December 23, 2006 Author Share Posted December 23, 2006 I wasnt familiar with the SR20DET so did a little web surfing to find out more. Looks good, but as far as I can tell, not offered in any cars sold in the US. If thats wrong please correct me. If thats true, I cant speak for others but for me that would be a problem. I dont want to be stuck with an unsupported orphan. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now