TwedleJoe Posted November 12, 2018 Share Posted November 12, 2018 Tech question guys, Pulling the yoke off the rear of the tranny, any special instructions? Any pointers to a good type 9 online manual would be appreciated. Link to comment Share on other sites More sharing options...
escondidoron Posted November 13, 2018 Share Posted November 13, 2018 Any pointers to a good type 9 online manual would be appreciated. I'm about to go through my Type 9 this next weekend. It will be my maiden outing. I'm going to install a BGH close ratio gearset along with new synchro, bearings and seals. I've looked around quite a bit in preparation and come up pretty empty for a thorough online guide. Empty enough that when I was in the UK this past summer I made it a point to stop by and meet Brian at BGH and get some personal hand-on instruction from the voice of his 40 years of Ford transmission experience. He kindly took me through the overhaul of a gearbox that they were doing for a customer during my visit. Now, 4 months later I'm about to see what, if anything, I can remember from that experience. That said, here are links to the most helpful materials that I have come across on the web WRT the Type 9 gearbox: Classic Ford magazine T-9 guide I hope that his helps. Link to comment Share on other sites More sharing options...
panamericano Posted November 13, 2018 Share Posted November 13, 2018 Good info in the links. Thanks for posting. -Mark Link to comment Share on other sites More sharing options...
vstryker Posted November 13, 2018 Share Posted November 13, 2018 When i pulled the yoke from my 6 speed, i had to move the rear diff back a few inches in addition to moving the engine forward a few inches while tilted to clear everything. The yoke is about 5-6" long iirc. Remember to drain the transmission as you'll get some fluid coming out. Other than that, pretty straight forward coming off. Link to comment Share on other sites More sharing options...
James A Posted November 13, 2018 Share Posted November 13, 2018 (edited) I have done 4, T9 overhauls now but they were all 5 speeds I don't know how similar they are to the Cat 6 speed though. Here you go: https://www.dropbox.com/s/4i6b4ll85wqsfu2/%27N%27_Transmission.pdf Edited November 13, 2018 by James A Link to comment Share on other sites More sharing options...
TwedleJoe Posted November 14, 2018 Author Share Posted November 14, 2018 (edited) good luck and let us know how your rebuild goes. just found this. https://www.sevener.fr/fichiers_articles/Manual_Type9.pdf Edited November 14, 2018 by TwedleJoe Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now