Hubcap for HPC Wheel

[werthie]

hi there . . .  does anyone have a spare hubcap for the HPC wheel that i could buy?  in the picture below, it's the cap that covers the lug nuts.

 

many thanks,

 

alan in LA

 

[CBuff]

May want to check in with @Vovchandr  I think he was in the hunt for a long while. Had a lead on 3d printing them but think that stalled. 
 

 

 

[Vovchandr]

So his is actually different. There were two sizes offered in three Varieties. One for SLR 13s and other two for 15s and 16s that came either as a fixed solid metal unit or one that where the center cap with the 7 popped into the bigger center cap. 

 

I actually do have a spare metal one I ordered from UK that doesn't fit me and will fit this wheel. It helped me gather all this knowledge on the most trivial thing on the planet. I don't see any reason to sell it but I also have no reason to keep it at this point either. In a pinch I guess I could modify it to fit by cutting the outer ring small to fit my dimension as these are a rare commodity and I'm having a hard time with replacements as you can see in thread above. Took me about 3 years to track down a set from UK. They come up on occasion on ebay. 

[jordway]

Sounds like @vovchandr has this figured out.  @thedreamer educated me a while back regarding the different varieties of these very similar caps.  I have the plastic variety that I'm not using, just in case @werthie or anyone else needs one of those instead.  No charge.  They are the ones that came on the stock 2002 Roadsport 16" wheels.  They look identical to the photo werthie posted, but I now realize the different varieties are really hard to distinguish in photos. If you also need the 3-hole securing bolt, I have those also.