The Stig Posted March 12, 2012 Share Posted March 12, 2012 Need a set of 4 x 28in straight both ends plug wires for the Crossflow. Thought I would pick up something off the shelf as sems simple enough but no such luck. Any recommendations for an easy source without resorting to a DIY cut and budge route from a kit? Link to comment Share on other sites More sharing options...
JohnCh Posted March 12, 2012 Share Posted March 12, 2012 Magnecor offers a set for the crossflow. Not cheap, but they are very well made. -John Link to comment Share on other sites More sharing options...
bball7754 Posted March 12, 2012 Share Posted March 12, 2012 I purchased a set for my Crossflow from Dave Bean. http://www.davebean.com/ Steve Link to comment Share on other sites More sharing options...
Sabbot Posted March 12, 2012 Share Posted March 12, 2012 I'm currently looking at BAT and Pegasus Racing for cross flow and BDA parts I haven't yet purchased from either of them but they seem to list a fair number of relevant FF1600 parts http://www.batinc.net/ https://www.pegasusautoracing.com/advcat.asp?CategoryID=IGNITION Link to comment Share on other sites More sharing options...
Tony Posted January 27, 2014 Share Posted January 27, 2014 Just measured the resistance in my plug wires, original '93 Lucas Silicone, three were around 7400 ohms, one was 11,400. Would that be enough variation to effect performance? Would be easy now to replace them all with carbs off and dizzy in plain sight...... Link to comment Share on other sites More sharing options...
TheDingo8MyBaby Posted January 29, 2014 Share Posted January 29, 2014 I've had good luck with Taylor's, but MSD has high quality "build your own" kits. I'm not familiar with the Spiro-pro kits from pegasus... New wires tend to be 4-6Kohm from what I've measured. I would definitely replace tony. Dave bean, JAE, Pegasus, BAT and Tony Ingram would all be happy to sell you a set of plug wires. In general, for a street car it probably isn't too big of a deal. You just want to make sure they don't get bent, chafe, etc. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now