GBOLT Posted December 10, 2012 Share Posted December 10, 2012 I just scored an old Harmon Kardon 430 twin powered receiver for free. Sounds awesome. One man's trash is another man's treasure. Link to comment Share on other sites More sharing options...
twobone Posted December 10, 2012 Share Posted December 10, 2012 Awesome find. I remember when an amp was a symbol of taste. The centre piece of a man's den (cave). All cool nakamichi black with a soft glowing power button. Pressing that button was followed by an electric hum as the machine prepared to turn current into clean sharp sound energy. Put on "Dark Side of the Moon" Man! Before the internet, before the CD, before the ipod. Good times Link to comment Share on other sites More sharing options...
yellowss7 Posted December 10, 2012 Share Posted December 10, 2012 I have a closet that my wife calls old junk, I call it "The Museum" :cooldude: I have my old Teac reel to reel, Dual TurnTable, Big Sony receiver with dual power meters, Cassete tape deck, and some vintage JBL speakers. I've tried to set them up a few times but she always finds them and threatens to put them on ebay. Each pieces is nice and heavy so I doubt that she could lift them. :jester: I think the speakers weight close to 60 lbs each. Ah, the good ole stuff. Tom Link to comment Share on other sites More sharing options...
blubarisax Posted December 10, 2012 Share Posted December 10, 2012 Nothing sounds better than tube amps! McIntosh is my favorite. Keep meaning to stop at the factory on the way to Watkins Glen. Link to comment Share on other sites More sharing options...
yellowss7 Posted December 10, 2012 Share Posted December 10, 2012 Those McIntosh amps and preamps were waaay too expensive for me as a 20 year old. Even now, go on to ebay and look at the prices of those old beasts. Karl you were way ahead of your time if you had that as part of your system in your youth.:flag: Link to comment Share on other sites More sharing options...
HOTTTCAR Posted December 10, 2012 Share Posted December 10, 2012 Love McIntosh amps Bought my first amp and preamp back in the sixtys. Have had one ever since. They still shake the place. When my kids were young they wiped out too many good speakers, but would do it all over again. Link to comment Share on other sites More sharing options...
DeanG Posted December 10, 2012 Share Posted December 10, 2012 I miss my old Onkyo Link to comment Share on other sites More sharing options...
GBOLT Posted December 11, 2012 Author Share Posted December 11, 2012 (edited) I helped my kids put one of these together last winter, it sounds fantastic. Please both my kids loved building it. Nothing like a tube amp. Edited December 11, 2012 by GBOLT Link to comment Share on other sites More sharing options...
twobone Posted December 11, 2012 Share Posted December 11, 2012 gbolt - very interested - what brand and where did you get it? Link to comment Share on other sites More sharing options...
GBOLT Posted December 11, 2012 Author Share Posted December 11, 2012 twobone, Got it from a guy who is a dealer in Canada. He's a great guy search ebay for - ELEKIT TU-870R 6BM8 Tube Power AMP (Kit). Victor is the guys name, and he is top notch. My next project is a set of these - tritrix mtm tl speakers. Link to comment Share on other sites More sharing options...
twobone Posted December 11, 2012 Share Posted December 11, 2012 Hey gbolt. Thanks. I was looking at the chinese prebuilt. The japanese based kit looks cool and probably has better components. I have little if any solder experience. How tought is the solder work? Link to comment Share on other sites More sharing options...
blubarisax Posted December 11, 2012 Share Posted December 11, 2012 Those McIntosh amps and preamps were waaay too expensive for me as a 20 year old. Even now, go on to ebay and look at the prices of those old beasts. Karl you were way ahead of your time if you had that as part of your system in your youth.:flag: I got them about 10 years ago, as a youth it was 8-track tapes and transistor radios! Link to comment Share on other sites More sharing options...
fastg Posted December 11, 2012 Share Posted December 11, 2012 I run a Knight KG-240 and a set of Wharfedale 10.1's in my office, and a Modified new production Dynaco ST35 with a matching pre-amp, and a set of Dynaco A-25 speakers in my family room. Both setups sound way better than people think that should. Graham Chicago Link to comment Share on other sites More sharing options...
GBOLT Posted December 11, 2012 Author Share Posted December 11, 2012 (edited) Hey gbolt. Thanks. I was looking at the chinese prebuilt. The japanese based kit looks cool and probably has better components. I have little if any solder experience. How tought is the solder work? It was easy enough for my 10 and 12 year old's to complete. Really straight forward, just need some basic resistor information, and you have to watch the orientation of the caps and diode's. Instructions were really clear. My son went on to build several other items afterwards. I would recommend a good solder station though, cheap tool = bad result. Mine cost about $100, Hakko FX888 ESD-Safe Soldering Station I have the build manual in pdf, I forward it to you. Edited December 11, 2012 by GBOLT Link to comment Share on other sites More sharing options...
raceral Posted December 11, 2012 Share Posted December 11, 2012 Yep, even I still got my old JVC Quad 4 system I bought in 1975, along with a Sony dual cassette deck, JVC fan cooled 8-Track, Sansui strobe turntable, Teac headphones etc, even got all the original literature and brochures. Been thinking recently of taking it out of storage and installing it in the garage. Nice conversational pieces as well as great sound. Al Link to comment Share on other sites More sharing options...
GBOLT Posted December 11, 2012 Author Share Posted December 11, 2012 Graham, Did you get rid of the nasty perf cover? Link to comment Share on other sites More sharing options...
GBOLT Posted December 11, 2012 Author Share Posted December 11, 2012 Hey gbolt. Thanks. I was looking at the chinese prebuilt. The japanese based kit looks cool and probably has better components. I have little if any solder experience. How tought is the solder work? Manual sent Link to comment Share on other sites More sharing options...
Mondo Posted December 12, 2012 Share Posted December 12, 2012 (edited) Back in '77, I was your typical Air Force Wingnut that was into high fidelity. Had the 10in reel to reel, where I recorded my brand new albums (and rarely played them on the phonograph to keep them prestine). I had some trick tower Infiniti speakers and this bitchin 400/4000 - amp/pre-amp set up: http://www.phaselinearhistory.stereomanuals.com/4000preamp.htm http://www.phaselinearhistory.stereomanuals.com/400seriesamp.htm http://www.bobbyshred.com/infinity/QLS.html Oh, to be young, single, and without a care... . Edited December 12, 2012 by Mondo Link to comment Share on other sites More sharing options...
yellowss7 Posted December 12, 2012 Share Posted December 12, 2012 WOW! That was some nice stuff! Link to comment Share on other sites More sharing options...
GBOLT Posted December 12, 2012 Author Share Posted December 12, 2012 Carver's stuff was always well done. My kids still can't get their heads around reel to reel. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now