Need to source WCM Ultralite S2K front lower A arm

[bobsaito]

Hello, I'm new to here.

 

I have 2006 WCM ultralite S2K since 2007 and today I got front right lower A-arm ripped.

Since WCM is no longer in business, I'm not sure where I can source this (and other parts in the future).

Any information would be much appreciated.

 

Regards,

 

Bob Saito

[11Budlite]

Welcome Bob,

 

I'm not sure where you can get replacement parts for an Ultralite, but do you have a photo of the control arm? It might be something that could be easy to repair or fabricate.

[powderbrake]

A forum member is now the owner of World Class Motorsports, the Ultralite company, His forum name is WestTexasS2K .

He may be able to supply you with the A arm. In 2006 it is likely that you have the Fiero spindles, later ones have Mustang spindles.

 

There is a manual on the car, assembled by the members here, if you PM me with your email address I will send you a copy.

[xcarguy]

Bob,

 

Welcome aboard. The S2K group here will have you back on the road in no time.

[bobsaito]

http://www.usa7s.net/vb/attachment.php?attachmentid=14990&stc=1

Here’s a picture of ripped rod. I managed driving 12 miles with this.

[Foxfire S2K]

Bob, when I switched my WCM S2K to wide, sticky slicks for autocross, I stopped hard at the finish and broke one, bent the other. I had a race shop in town make me much stronger ones with larger diameter tubing, and they have worked wonderfully. That particular shop has closed so I can't give you a direct referral. Don't know where you live, the outstanding parts shop on Indy's Gasoline Alley (Earl's Indy) knows all the race shops and can give you a referral. There are many near the Indy 500 track. http://www.earlsindy.com is their url. You could then mail your 2 wishbones to that shop. Hope this works!

[Foxfire S2K]

Here is a photo of the original tubes and the wonderful replacements.

WCM S2K front suspension upgrade

Paul Snyder

[fastg]

Contact Jack at Kinetic, a great guy and does a very nice adjustable front control arm kit. I am not sure what spindles you use but I think Jack has some options.

 

http://www.kineticvehicles.com/ControlArms.html

 

Graham