Check inspect 2012 speedo sending unit.

[Reiver]

No speedo ...the speedo has power and both the speedo and tach do the 'sweep' when the car is turned on.  It shows the mileage and is lit. 

However, no speed indicated when driving and no odo change so suspect the sender.

Jacked up, wheel off and properly adjusted to .625 mm from the wheel...the power on and the clear portion of the sender lights up where the wire enters the tube.  Spin the hub and it remains lit, does not pulse..... I am assuming it should?  Yes?  If so then toast.

[Origin7]

From my non-automotive/industrial experience, if these sensors have an LED they typically pulse ON/OFF when triggered. If you're sure a metal object is passing through the viewing area, and you're getting nothing out, it's toast.  

[Reiver]

That was my assumption but wanted to ask..... easy to fix with the replacement... the newer ones are supposedly more stout.