toldfield

how long?

Try North Hollywood Speedometer Repair Nhspeedometer.com

No problems. There are some threads here about pulling it out. I made sure that the steering wheel lock was not engaged by turning the ignition on. Mine came right out. Some guys have had to use a bit of force. It is possible to damage the white plastic bushing that is in the dashboard so I bought a spare.

I bought the QR and top shaft from them. The QR is already attached to the upper column. Easy installation they are very nice to deal with.

https://www.meteormotorsport.com

Meteor Motorsports

On my car, a '82 S-3, the master cylinder has separate lines/circuits for the left and right front brakes. When I ordered a new Spitfire master cylinder it had one circuit for the left and right front brakes. The left side was worn and my brakes pulled to the left. Rather than modify the plumbing I found a shop that rebuilt/sleeved master cylinders and had it rebuilt. Jeff was not able to sleeve them but did an excellent job of rebuilding them. http://www.karpspb.com/cylinders I bought my pads from Porterfield. https://porterfield-brakes.com/ I bought a kit to overhaul the front calipers from Moss Motors and it came with the O-rings. No leaks yet... Tom

A man has got to know his limitations. Dirty Harry.

I bought mine from the original owner already assembled. All my daughter wants to do is drive it...

I used the Odyssey box on top of the footboy shelf. Easy job since I am not encumbered with luxuries like a heater... tom

https://iveyengines.com They have been very good for me.

Is this it? https://www.roversnorth.com/parts/ntc7161_cap_coolant_expansion_tank_15_psi_rrc_defender_discovery_i

Many years ago I built two panels for my Cessna 140. It wasn't that difficult with a couple of the correct size chassis punches, a small shear, and files and such. The most difficult part was rolling the bottom of the panel under 90 degrees for a small lip. I had the local junior college metal shop do the bend, they did the radius to sharp and I got to make another panel. I am by no stretch of the imagination a craftsman, but it came out very well. Today there are a number of online resources that will help you design a panel and then they will cut the panel that you design. Tom

Anyone else going to the West Coast Lotus Meet? October 17-20 at Clearlake CA. https://westcoastlotusmeet.com

I think that one is for Bonanza owners...

Well yeh...

I bought the cigarette lighter socket I installed at West Marine but I don't see it on their website now. Aircraft Spruce has some, one of which is stupidly expensive.

https://www.mcmaster.com/products/chassis-punches/

You might look at Burton and see what they recommend. https://www.burtonpower.com/spark-plug-ngkbp7es.html Or my fallback, call Ken at Dave Bean.

Good save...

There was a discussion last year with some interesting ideas...

Good luck with the Max. I've found that the GoPro software is the best place to start and then move it into a editing program.

Is anyone headed to Monterey for the Rolex Reunion? It's not much, but I have one ticket left for Wednesday and one for Friday that I can't use. Tom O

Call Ken at Dave Bean and describe what is happening. He is a great resource and fountain of knowledge. tom