Ok ... that clears it up for me .. I will be registering as a Non LOG.
So .. I will participate in the USA7s events ++ and will arrive on Friday for the first one .. and stay through until Sunday night and leave sometime Monday morning - noon.
I envision driving back to Atlanta and then maybe a run up to the ToTD Monday and Tuesday.
I still need to get a hotel reservation .. Can I use the discount code??
Rob Mitchell
Rotus7
aerodynamics on land .. The American Eagle is aiming for 800 mph!
What to do with a Lockheed F-104 Starfighter junker??
http://www.nytimes.com/2009/04/21/science/21speed.html?_r=1&em
check it out:
http://cgi.ebay.com/ebaymotors/Lotus-Seven-Series-1_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1171Q7c66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a0Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem130301507562QQitemZ130301507562QQptZRaceQ5fCarsQ5fNotQ5fStreetQ5fLegalQ5f
ROB
I just installed the standard UK stop/tail assembles on my car. External mount with a rubber wedge to conform to the curve of the rear fender. I installed them both with four stainless steel bolts and washers and lock nuts on the inside of the fender. Only problem is that these assemblies do not have the backup light. That is a separate box.
(These replaced the pitiful Toyota through mount assembles which were spaced out/ through the fenders with a carved piece of crappy wood!)
Rob
Here's an example of the standard UK assemblies .... The center red is a reflector.
Well in Atlanta we do have the poison called the VARSITY. I eat there about once every few years. And I do tell her that I'm meeting the guys there.
I think you are right .. I have seen the Windsor Ballet 2x in person ! Full Monty performances. But NO personal performances in any back rooms! (This was before I got married ...) The guy I was with disappeared for about 30 minutes while I hit the full buffet .. Great food and a few drinks!
I've not partaken of any of the US/ Atlanta "strip" joints. And as a physician I see anatomy all the time .. so I really don't care ...
Rob
Just checking up on an old post .. John .. hopefully I can show you in person! It is just a simple L shaped piece of aluminum bolted in the adjusting groove and holding a Toyota brake switch against the brake petal travel.
Yesterday I finished installing the windshield .. with slightly longer screws through the uprights to hopefully hold better ..
and reinstalled the two Muth Signal Mirrors .. wired them in and checked all the functions that the Muth Multifunction Module does:
Fast strobe in Reverse
Brake light function
Fast strobe when blasting the Hella Supertone Horns
Simulated Alarm Tic.
Wiring is FINISHED !!!!
TO DO:
Install some 3M protective film on some critical areas.
Install two Caterham Leather Seats (weld new brackets for the runners)
Install the seat belts
Reinstall the exhaust .. (probably fab a new one later).
Gas her up .. tune the carbs again and roll her out!
Install interior panels
Rob