San Augustine Posted Monday at 07:39 PM Posted Monday at 07:39 PM @11Budlite you are correct sir! rather pricey https://www.am-speed.de/en/product_info.php?info=p3142_accel-ignition-super-coil-45000v-140001.html @7Westfield radiator is Coventry Radiator & Presswork CO LTD Also marked Stanpart dimensions 16 1/8 wide 13 high 1
7Westfield Posted Monday at 08:38 PM Posted Monday at 08:38 PM (edited) Stanpart was a clue will take measuring one, but could be an adaptation from an early Spitfire Edited Monday at 08:47 PM by 7Westfield
pethier Posted Tuesday at 06:25 AM Posted Tuesday at 06:25 AM (edited) On 11/15/2026 at 1:05 PM, San Augustine said: @73TwinCamSpecial I have chassis s4 3123 GTS which is a RHD car imported to the states in 1974. special time capsule back on the road. I suppose everybody else already knows this, but that front suspension and swaybar setup looks just like my old Europa. I bought bolts for the upper control arms from the Caterpillar dealer because nobody else local had bolts long enough. Edited Tuesday at 06:26 AM by pethier
EdWills Posted yesterday at 12:37 AM Posted yesterday at 12:37 AM @73TwinCamSpecial. Enjoy the new addition to your fleet. Coincidentally, I was reading an article on Alan Barrett who was the designer of the Seven Series 4 bodywork. In an interview with him, the journalist (or Alan Barrett) mentioned that the Series 4 was fitted with a 3000E gearbox. I also found this noted in John Tipler's book titled 'The Lotus and Caterham Seven' where Mr. Tipler describes the Series 4. Not being familiar with the many Ford U.K. car options, I did an on-line check, and the 3000E Series applied to the early 1970s Ford Capri cars fitted with the 'Essex' or 'Cologne' V6 engine series. The 3000E box was a heavy duty unit as compared to the 2000E (more correctly the 2821E gearbox).. Some Ford historians on this forum may know better, but would the T9 be this heavy duty box? A pre-'Rocket' box was fitted to the early production models, then the 'T5' three rail box was installed circa 1972. The 3000E Capri also had an option for an automatic 3 speed '35' Borg Warner gearbox. The Capri was designed by Philip T. Clark who was also involved with the design of the Ford Mustang according to 'wiki'. Cheers W.
pethier Posted yesterday at 08:29 PM Posted yesterday at 08:29 PM 19 hours ago, EdWills said: The 3000E Capri also had an option for an automatic 3 speed '35' Borg Warner gearbox. Is that the same BW 3-speed that was fitted to so many Triumph Stag cars? On that car, one of the things Yanks didn't like about it was that it had too low a top gear for freeway cruising. There was a BW 4-speed with the same case that many Stag folks have put in. Not a problem for me, since the restorers had converted our Stag to a Triumph 4-speed manual with overdrive.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now