BusaNostra

Thank you guys.....i appreciate the response. I will study the aem crank pulse table value. Yes, mine is forced induction too. Westtexas, what ECU are you using now? Hondata?

Cold start issue Can someone with AEM EMS s2000 help me send the calibration value of the Crank injection time & startup fuel. I keep cranking - cranking - & cranking and it will not start. But once started (even in seconds) the car will have no problem restarting. Only early morning first start. The injectors are pushing too much fuel. When I turn the fuel pump off, it will start. There is a value under "startup fuel" or any value you can find under cold start. Thank you!

I think the GTR was the fastest --- 500 less hp

http://autos.yahoo.com/blogs/motoramic/see-2-000-hp-corvette-win-second-king-205751579.html

I have a 3.90 and you are right - it'll bleed your ears. Mine is Sierra diff with quaife.

What if you have 3.90?

Is your laptop "auto update" meaning when you turn it off, it will update some of the patches from Microsoft? Try this: click start - right click my computer - click properties -click hardware - click device manager (first, do you see yellow from other devices?) - click ports - click communication ports 1 or 3 - click disable - then click enable ----->then try the emerald.

oh...well, then my Esprit is already 100 years old.

...i might as well enjoy my 2 dinasour ESPRIT http://imageshack.us/a/img21/3268/04242008057.jpg

dinan I have a very good bec machine shop that deals with competition, if you need info pm me. would you mind to tell where you from?

I blew my busa @22 psi of boost --- Rod went south - oil all over the track -- limerock was mad!!!!

I don't have a gauge...buying one at summit...thanks

Thanks - I will try to download AEM EMS software and check for the pulse. I like to replace it but I have to take a lot of stuff.

Question: can water damage a crank sensor? My 7 suddenly behaving bad - hard to start - sometimes it will start then die. Sometimes it will run but missing. The anti freeze leaked in the front of the engine, pouring at the crank sensor area.....that's the only thing I can think of....oh I cleaned & hosed the front too.

Thanks....I got one at the local hardware not exact one but good enough. Awesome! I ordered the right one from Grainger.....thanks Klasik http://www.grainger.com/Grainger/wwg/search.shtml?searchQuery=vibration+mount+rubber&op=search&Ntt=vibration+mount+rubber&N=0&GlobalSearch=true&sst=subset

Thank you....i will visit the local hardware. sKINNY- I got that but too small. In the picture looks big but when you get it...little tinnie winnie insulator

Do you know where to buy a exhaust rubber mount like this one? I broke the other side - I can't find who sells them. No luck to Napa either. http://imageshack.us/a/img31/5585/mount002.jpg

i can stand up there forever -- i don't mind filling up my 7 bit by bit -- people watching & appreciating the car. what i can't stand is filling up my SUV with price of a gallon approaching $4.

So I guess I will vote for the same guy again. Not really happy but we really don't need to make it worse. But when you do the math - when dissatisfied reach 50%, we better pay attention. Other polls reaching 77% and 23% satisfied. That's more than worse. So, how can I go wrong if I change? The worse can happen is the same sewer economy, however there is also a chance to make it better. Just remember there are 47% who pay taxes - what happened to the 53% ? We are now in the minus side. So how can we live with that figure if the situation even get worse?

why doubt? why do we need to argue and vote for the same guy when a liberal polls showed 62% thinks that our country was going in the wrong direction.....if I tell you fox said this, you will go ballistic....again, "for the good of the country" means we need to change. Sometimes, I think some of the freeloader have no reason to change. http://www.pollingreport.com/right.htm

is this stirring the pot? Nope...someone asked to stir the pot, which I did first. I'm always been candid & no BS - I'm rep (not conservative), there is a distinction. All i want was what speedwagon said...."what is good for the country" Better yet...what Clint Eastwood said: "When somebody doesn't do the job, you gotta let `em go,"

stir the pot? the only witch I know that stir the pot is pelosi

http://img801.imageshack.us/img801/6582/fatstupid.jpg

shot taken from bowling alley

just google and click image, you'll find hundreds of them