Jump to content

RMC #39 420R Build Thread


captain pabst

Recommended Posts

Just delivered this Morning before the driver headed up a little north to drop off another. 

 

edit: oops put this in the wrong spot. missed the dedicated build threads. Mods either delete or move please.

IMG_5549.jpeg

IMG_5562.jpeg

Edited by captain pabst
note about being in wrong location
Link to comment
Share on other sites

2 hours ago, captain pabst said:

Just delivered this Morning before the driver headed up a little north to drop off another. 

 

edit: oops put this in the wrong spot. missed the dedicated build threads. Mods either delete or move please.

 

Done.  Congrats on the arrival!  What options did you add other than the stripe and weather gear?

Link to comment
Share on other sites

34 minutes ago, JohnCh said:

 

Done.  Congrats on the arrival!  What options did you add other than the stripe and weather gear?

Thanks!

its Series V with lowered floors
Heat!
Carbon seats
4 piston brakes
track day cage

shift lights

map pockets 

 

Link to comment
Share on other sites

4 hours ago, JohnCh said:

If you optioned the cage, then there is no point in asking if you plan to track it :)  


oh hello!   What’s your local track @captain pabst ?

 

Congratulations on Christmas arriving early!  

Link to comment
Share on other sites

I'm the guy from 'a little up north'! 😆 Congratulations! Thanks for doing the crate unboxing and removal first, the driver knew exactly what needed to happen and we were offloaded in 30 minutes!

  • Like 1
Link to comment
Share on other sites

12 hours ago, Croc said:


oh hello!   What’s your local track @captain pabst ?

 

Congratulations on Christmas arriving early!  

Summit, I haven't been this year but look forward to the build on this and going from there.

 

12 hours ago, Legs said:

I'm the guy from 'a little up north'! 😆 Congratulations! Thanks for doing the crate unboxing and removal first, the driver knew exactly what needed to happen and we were offloaded in 30 minutes!



Glad you guys got it unloaded so quick. I got about 5 minutes notice before he showed up so I was extremely short handed.

Edited by captain pabst
Link to comment
Share on other sites

On 9/9/2024 at 4:05 PM, JohnCh said:

If you optioned the cage, then there is no point in asking if you plan to track it :)  

Optioned but not included at all. I have quite a few missing things, including a missing pick list which could explain a lot, but makes reconciling what is and isn't there even harder.

  • Sad 1
Link to comment
Share on other sites

I've made some progress, Front suspension is on. We put the wheels on for fun ( I have a 5 year old )
I did the suspension while everything was very low to the ground and put it on jack stands after. 
Engine and Tranny are ready to be bolted together.
Seats are just placed in the interior. 
Having a lot of fun so far ( even amongst the looking for the correct hardware for each step)

IMG_5727.jpeg

IMG_8708.jpeg

IMG_8710.jpeg

Link to comment
Share on other sites

I am very biased. But love the green. Good luck. I can’t  offer many insights as mine was factory built but happy to take pictures or measure anything on my car if you need. Mine is a 2022/2023 so it should be very similar.  

Link to comment
Share on other sites

  • 2 weeks later...

So one thing I find to be daunting is the drilling of the steering wheel. I have come up with the following 3d model that should take some of the guess work out of it. Feel free to use it as you please. The hole at the center is 2mm and I used a small drill bit here to center on the divot in the back of the wheel.
The holes for the drill bit are modeled as 6mm. I measured my bolts as 5.8mm
This is designed around the felt wheel. The thinking being there is a pointer at 12 o'clock and then a flat on the bottom to align with the text of the wheel (assuming it is square).  the gold is from my kid and the paint pens... 

IMG_8714.jpeg

 

steeringdrill11mmextension.stl

Edited by captain pabst
Link to comment
Share on other sites

  • 2 weeks later...

Yes, that transmission tunnel is tight.  Given production tolerances, some transmissions rest against the side of the tunnel requiring extra effort to create a gap.  Any updates from Caterham on your missing roll cage?  

Link to comment
Share on other sites

1 hour ago, JohnCh said:

 Any updates from Caterham on your missing roll cage?  

My missing parts including roll cage and pick list are en route. I hope it has everything. Seeing some other threads where there was 1 missing radiator mount and I have the same issue. Probably best to be the lowest number in a group of cars coming over instead of the highest like mine was.

  • Thanks 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...