Jump to content

'99 Caterham Classic in California - New Member


TheDingo8MyBaby

Recommended Posts

Hello, my name is Geoff. I picked my dream car about a month ago and was lucky to get a 2 year old SB100 registration through. I was just recently able to get it running right and just barely got it washed for the first time today. It's a '99 live-axle, X-flow super sprint.

 

The fiberglass is isn't in great shape, but it came with all new red bodywork. I plan on fixing this bodywork and painting it a gunmetal that I expect will contrast nicely with the aluminum.

 

Other than that, my only other plans are to change out the cracking coolant hoses and add some water wetter (it'll get up to about 100degC if stationary), change the oil to 20-W50 valvoline not-street-legal due to the flat tappet valves, buy some decent R-compound rubber for it and do A LOT of driving.

 

Anyway, I took it for a drive up in the Orange Hills and found a nice place to snap a couple with my point and shoot. I apologize for the blurryness but they came out alright for not having a tripod.

 

http://img.photobucket.com/albums/v121/TheDingo8MyBaby/SANY0379.jpg

http://img.photobucket.com/albums/v121/TheDingo8MyBaby/SANY0376.jpg

http://img.photobucket.com/albums/v121/TheDingo8MyBaby/SANY0380.jpg

 

I sure wish I had a SLR for this one...the way the california sunset was reflecting off the aluminum was pretty neat. This shot doesn't even begin to capture it.

http://img.photobucket.com/albums/v121/TheDingo8MyBaby/SANY0385.jpg

 

Anyway, I look forward to getting better acquainted with all of you and happy motoring.

Link to comment
Share on other sites

Welcome aboard Geoff, very nice classic look you have there - same spec as my first cat, same colors as my second, so I'm biased. If you're fitting new body panels that haven't been cut yet (rear's in particular) I found it useful to make a template from the old wings - pic attached (see foreground).

 

Good luck, and happy driving.

 

Steve.http://www.usa7s.com/aspnetforum/upload/741958703_new arch.JPG

Link to comment
Share on other sites

Hello Everyone, Thanks for the kind comments.

 

The wheels are 13". The tires are Sumitomo HTR200 205/60/13. I'm looking to purchase some A048's in the same size soon though...

 

I'm actually debating if I should paint the nice bodywork and use this set for autocross/track. I was having trouble before deciding on the gunmetal vs. British racing green with yellow lipstick. I may vinyl the british racing green/yellow on this abused set and paint the gunmetal on the other set...

Link to comment
Share on other sites

While I certainly don't oppose the look of carbon fiber on the proper 7, I think I'd like to keep it looking relatively, well...classic.

 

If I had a later, more agressive car, I would think carbon on aluminum would be very nice. On my live axle, X-flow I worry it would look like I were trying to put lipstick on a pig. :)

Link to comment
Share on other sites

Mine are 13x6 as well.

 

http://img.photobucket.com/albums/v121/TheDingo8MyBaby/caterhambeach.jpg

 

You can see they're pretty wide for the width of the rims, but 205 isn't THAT bad for a 6" wheel. My preference would be staggered 14" (running 185/60/14) or 15" (running 195/50/15) wheels to fill up the rear fenders a bit better, but it seems the car is a little prone to understeer already.

Link to comment
Share on other sites

Get yourself up to LA some day, there is a lot of action here

 

http://www.lotustalk.com/forums/attachments/f96/89913d1220389487-los-angeles-sunday-drive-meet-8-30am-leave-9-00am-part-2-1.jpg

 

http://www.lotustalk.com/forums/attachments/f96/89915d1220389487-los-angeles-sunday-drive-meet-8-30am-leave-9-00am-part-2-3.jpg

 

 

 

 

Link to comment
Share on other sites

Thanks... I set the first on the ground because I didn't have a tripod for the low light and my point and shoot is not great.

 

The second was taken with a better point and shoot...I think it came out pretty good considering. I'm no morgan segal though.

 

Morgan,

 

I'd love to make it out sometime- just let me know when you guys are going. I'll do my best to keep up with my crossflow and touring tires.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...