MightyMike Posted September 4, 2017 Author Share Posted September 4, 2017 I had ceracoating applied to the rear diffuser. It is now the same color as the headers/exhaust. http://i64.tinypic.com/118jczd.jpg Working on my clamshell brackets now and really do need to buy a welder. I had to trim about 3" off the clams. IMO, they look far better trimmed. I will paint them Lotus Racing Green. http://i64.tinypic.com/34ditme.jpg http://i68.tinypic.com/307ywyc.jpg http://i66.tinypic.com/a5klxz.jpg Link to comment Share on other sites More sharing options...
xcarguy Posted September 5, 2017 Share Posted September 5, 2017 Looking awesome, Mike! I do like the clams. :cheers: Link to comment Share on other sites More sharing options...
MightyMike Posted September 5, 2017 Author Share Posted September 5, 2017 Thanks Shane. I cannot wait to get them painted. I'll probably start on the brackets next weekend. Link to comment Share on other sites More sharing options...
Mondo Posted September 5, 2017 Share Posted September 5, 2017 Be curious to see if they cause a lot of lift... they kind of look like wings in that one photo. You definitely have one of the most badass Bruntons around Link to comment Share on other sites More sharing options...
MightyMike Posted September 5, 2017 Author Share Posted September 5, 2017 Mondo - I am not sure what to expect. If It becomes noticeable and a distraction, I will probably start drilling holes and installing louvers. Link to comment Share on other sites More sharing options...
jbanker Posted September 5, 2017 Share Posted September 5, 2017 Mondo - I am not sure what to expect. If It becomes noticeable and a distraction, I will probably start drilling holes and installing louvers. Looks good Mike. I never had any problems with lift on chassis #10 but I never drove it much over 100 on the hiway. Auto cross was from 70 to 80 at the most. I also added a defuser much like yours plus an adjustable rear spoiler and front spliter. That did make a difference on big and fast auto cross venues like at Grissom AF base. Jack Link to comment Share on other sites More sharing options...
xcarguy Posted September 6, 2017 Share Posted September 6, 2017 Mondo - I am not sure what to expect. If It becomes noticeable and a distraction, I will probably start drilling holes and installing louvers. I think MichaelD has holes in his clams. Link to comment Share on other sites More sharing options...
MightyMike Posted September 12, 2017 Author Share Posted September 12, 2017 So I taught myself to weld; fabricated a couple of brackets and installed my clams and headlamps. Everything looks great except now I cannot open the nosecone/bonnet contraption because it will not fit in between the headlights. I don't want to widen the headlights any further because the car would then look like my college friend Big-Eyed Phil, so I think I'm going to end up cutting the nosecone/bonnet and have it function like those on other Sevens. Any other ideas out there? http://i65.tinypic.com/rrr0r6.jpg http://i68.tinypic.com/5a1flv.jpg http://i64.tinypic.com/2ic0ivb.jpg http://i65.tinypic.com/2a6plzk.jpg Link to comment Share on other sites More sharing options...
xcarguy Posted September 12, 2017 Share Posted September 12, 2017 . . . I think I'm going to end up cutting the nosecone/bonnet and have it function like those on other Sevens . . . Yes:smash: :cooldude: Link to comment Share on other sites More sharing options...
wemtd Posted September 12, 2017 Share Posted September 12, 2017 Billiant! I think you need to come east to the annual NJMP seven's weekend next year Link to comment Share on other sites More sharing options...
coffee break Posted September 12, 2017 Share Posted September 12, 2017 If the headlights are rotated to have the flat sides facing each other, would that make enough clearance? Only for service, reposition before flight. Link to comment Share on other sites More sharing options...
m wirth Posted September 12, 2017 Share Posted September 12, 2017 maybe make a bracket to move the lights forward to the nose taper to allow for tilt. more welding practice. or like the Ultralite mount onto the bonnet. Link to comment Share on other sites More sharing options...
MightyMike Posted September 12, 2017 Author Share Posted September 12, 2017 maybe make a bracket to move the lights forward to the nose taper to allow for tilt. more welding practice. or like the Ultralite mount onto the bonnet. I hadn't thought of trying that - excellent idea! Link to comment Share on other sites More sharing options...
MightyMike Posted September 12, 2017 Author Share Posted September 12, 2017 If the headlights are rotated to have the flat sides facing each other, would that make enough clearance? Only for service, reposition before flight. Also a great idea - thank you! I was trying to put a square through a square hole. Link to comment Share on other sites More sharing options...
jbanker Posted September 13, 2017 Share Posted September 13, 2017 I hadn't thought of trying that - excellent idea! Mike, I had the same problem because the lights scraped the hood when you opened and closed it. I learned to squeeze both sides while standing in front of the car to avoid hitting the lights while lifting and lowering in those crucial areas of contact. I also considered cutting the hood off behind the nose, but did not do it. Jack Link to comment Share on other sites More sharing options...
jbanker Posted September 13, 2017 Share Posted September 13, 2017 I hadn't thought of trying that - excellent idea! Mike, I know you have custom headlights. I have 5" diameter motorcycle lights on chassis 21 and we put the same lights on chassis 106. The lights are also mounted on 2" tall standoffs that are about 1" in diameter. Jack Link to comment Share on other sites More sharing options...
MightyMike Posted September 13, 2017 Author Share Posted September 13, 2017 I am leaning strongly toward affixing a pair of headlight brackets to the nosecone/bonnet contraption. The brackets would be bonded to the undersides and come out and up into the same position as the existing mounts. Link to comment Share on other sites More sharing options...
Mondo Posted September 15, 2017 Share Posted September 15, 2017 The Ultralite has the headlight mounts attached to the frame right below the hoodline. They're not attached to the bonnet. Link to comment Share on other sites More sharing options...
m wirth Posted September 16, 2017 Share Posted September 16, 2017 But, some are. Link to comment Share on other sites More sharing options...
MightyMike Posted September 16, 2017 Author Share Posted September 16, 2017 Headlights are now mounted to the nosecone/bonnet contraption. I used a 1/8" steel backing plate behind the fiberglass. I plan to run the lamp wiring through the holes on the brackets, over to the front of the nose cone, and then down to the bottom of the radiator. I need to trim and sand the fiberglass before I send it off for paint. I'm really looking forward to getting Storker back on the road before the snow starts. http://i64.tinypic.com/2vbtxd1.jpg http://i65.tinypic.com/2pqmg4z.jpg http://i63.tinypic.com/2llhvu8.jpg http://i65.tinypic.com/sdfwnn.jpg Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now