Brightonuk

Jeff sold me so I am asking Santa for an M-Unit for Xmas There are lots of good install guides and reviews for the M-Unit on Youtube (all of them are for Motorcycles but still it all just 12v wiring) Revival Cycles is also very helpful in answering questions. Jeff has a good basic layout and here is one from Revival which is also easy to understand still for motorcycles but might be helpful

Great write up thanks

Rear Lights are sold Still got the back up lamps

Yep 4.5" Housing are in very good condition taken off my Superlite due to candle power (or lack of) I am 99% sure these are OEM from 2001 but I have been known to be wrong You will need to replace one lens as I think it has blown with a Wagner 4415 lens The post reads $150 they are $75 the pair #

Nose Cone and cycle wings wrapped a a CF finish

Great Photos

I have LEDs for my rear running/brake and turn signals) I have a ballast resistors wired into the flasher circuits (to stop hyper Flash) do I need one for the rear lights? As I seem to be having some issues, the turn signal buzzer is sounding, not full but like it is being fed a weak voltage and both the turn signal and high beam indicator lights are on, dim but on. The left turn signal is not working with the headlights on but the right seems to be flashing. If I switch off the headlights everything seems OK lights go out buzzer stops this happened at the end of a 45 minute drive this evening.

Yep the backing I think is a nylon weave Drilling is not an option I will take a look at the suggestions Thanks

I have a Kart Seat Pad that I need to fix to the seat with Velcro. The issue is, I use an industrial Velcro which is permanently stiched into the pad but gluing the other side to the seat back has not worked. Living in Florida the seat gets hot sitting in the sun, which in turn melts the adhesive holding the velcro to the seat, this as you can imaging gets really messy with sticky glue residue when the velco stip pulls off. I need an adhesive for fabric/vinyl that I can apply to the velcro that attaches to the seat back that is flexible strong but will not break down when it gets hot. (The Industrial Velcro is kinda grippy) Any suggestions?

Just signed up And going to be at West Palm next week hopefully you will see my lap record

Yes $125

I have one PM Me Or OMP

Jeff The headlights "on and high low" is this function controlled by one button? If so did you achieve it via the button on the wheel or via the M-unit

Radio is Sold

Carbon Fiber NRG wheel NIB http://www.getnrg.com/index.php?route=journal2/quickview&pid=1219 (Stock Photos) Never installed as I cant attach the wireless Wheel button unit

I have not received the replacement for my new wheel I will post it once I get the new one

Yes

Now find a track and see what all that hard work can do (-;

This works best with a Ractec quick release that I will have for sale in a week once the new one arrives The Wheel is in good condition I just did not use it much preferred a leather MoMo Mod over the fabric of this one This is a Formula Quadro (99% sure) if you need to make it look pretty just hit it with some black paint on the spokes

Sorry Missed that Large

Pair of Rear Light Assemblies with LED bulbs, Ballasts and Rubber Mounts Spare Colored Lens Super bright if used with the clear lens Overall, in very good condition one of the clear lens has a crack but it does not interfere with the operation or output (See Photo) Still have the reversing lamps if interested $25.00 $35 for the rear lights and one reversing lamp

Need to brighten up those Caterham candles I have a Pair of Xentec HID Ballasts Used but in excellent Condition Plug and Play just need one HID bulb (comes with one HID dropped the other one) $20

Bell Sport Mag with Rugged Radios OFSP Hemet Kit (Size Large) Has a few scratches on the visor overall, it is very good condition as I only used it 8 or so times? Never used the intercom kit Rugged Radios OFSP Hemet Kit mike and helmet Speakers Rugged Radios' new Dura-Link Sealed Connector, Clear Hear speakers and dynamic noise canceling mic for best audio performance. Helmet speakers are easy to install with peal and stick Velcro back. $175 OBO

I might have to split this into a couple of threads due to image upload limitations Start with the Stilo: Used less than 10 times for track days 2019 Stilo WRC Kevlar/Fiberglass Helmet with Soft Cover FIA 8859 and Snell SA2015 certified A small nick from my careless handling (again) overall in excellent condition Has integrated microphone boom, Ear Headphones and 2 sets of Earmuffs Hans Ready Retails for around $800 Finally decided a full face is needed for a superlight $650.00 for the helmet Also Rugged Radios 660 and SB47s Radio Strap to hold it on the trans tunnel (Never used the radio is excellent condition) (1) 660 2-Place Intercom System (2) HK-OFSP Dura-Link Helmet Kits with Flex Boom Mics (2) 12' Intercom Extension Cables 4 Spare Ear Muffs SB47s Strap $650 for the radio or $1200 for both or make me an offer OMP F1 Style Steering Wheel (I believe it is the Super Quadro but not 100% on the style) Black Grip, Black Anodized Aluminum Spokes, 12.200/10.433 in. Diameter 3 hole mount The OMP label is a little worn but otherwise in great condition $100 OBO Next post is the Bell Sport Mag

Yes that's my thinking it is the under dash bend that is the only real concern