Brightonuk

Andy There is a set of 8 trapps on FB Caterham Market Place for 20 quid No ones grabbed them yet

That's how I did it but just used a square piece of mat slightly bigger than the base of the trapp it seems more than adequate to hold them in place

Wow gorgeous looking motors

Used them on my front wings but I dont know of a US distributor Got mine from this place and had my sis mail them over https://www.ecfibreglasssupplies.co.uk/product/cable-tyrap-stainless-steel I glassed mine in with a small patch of fiberglass mat over each one so no way are they are ever coming off.

Ha just saw this one ugly looking car

I have the complete housing and cap from a superlight http://www.usa7s.net/vb/attachment.php?attachmentid=16074&stc=1

Sorry to hear of your grief you are correct you are not alone. Mine was a $2500 paint job that was crap then a $1500 engine repair that did not realize that banging was a main bearing (I did get a grand back from the paint shop) Road and Race down here in Fl was the place I used to rebuild my engine and although not cheap they know their stuff and back their work with 1 yr warranty. You might want to give Peter the owner a call (561) 845-6640 and chat with him. Good luck

Basic Specs The V.2, Blue, and Basic outputs have the same *maximum current (10A) and*minimum wire cross-sections (1.5mm²). Start outputs for the V.2, Blue, and Basic are 30A and 2.5mm². AUX outputs 20A Starter relay for solenoid switch up to 30A switching capacity Low and high beam control (up to 200W switching power) using just onepush button Jefferson can you upload another image of your wiring but in a larger file? This may be a new project any tips on things to watch out for?

I used this on recommendation from others for the frame. Rather messy as it drips out of any holes you have. It uses a long flexible tube you insert into one end of the frame which then shoots the product 360 degrees inside the tube as you pull it out, once dry you have a protective coating on the inside of your frame. http://www.usa7s.net/vb/attachment.php?attachmentid=16067&stc=1

I am going to be watching this one.... please step by step updates

Hey Florida is OK we got; Heat, Humidity, Traffic, Straight Roads, Pickups, Inconsiderate Drivers, People who do not speak English, Guns................ I could go on

Just a brand name you can use them I would suggest SS if they are available

Best Place https://www.sailrite.com/All-Hardware/Fasteners-and-Hooks/Snaps-and-Fasteners?gclid=CjwKCAjw2qHsBRAGEiwAMbPoDODwUkKHzTemtJQ7cXPmTONgqavebRaXQoF6Y3Gg8iFGn7C-qotKUhoC8oYQAvD_BwE Great for upgrading your snaps if you choose

Rear Are sold $275 inc shipping for the front pair KCD Front http://www.kitcardirect.co.uk/popular-products/caterham-carbon-rounded-front-cycle-wing-mudguards-13-pair.html http://www.usa7s.net/vb/attachment.php?attachmentid=15893&stc=1 http://www.usa7s.net/vb/attachment.php?attachmentid=15894&stc=1

Thank everyone sorted this side of the pond

Just noticed I lost one of the hood latches any idea where to get a replacement besides CC? http://www.usa7s.net/vb/attachment.php?attachmentid=15790&stc=1

Just need a few cats on track I am the only one.

Yep Thats me

Cumon Guys Cheap night out and more fun than laughing http://www.racepbir.com/tickets-events/calendar-of-events/eventdetail/14917/-/scca-track-night-in-america And cheaper than a night out on South Beach.

Nope

http://www.usa7s.net/vb/attachment.php?attachmentid=15772&stc=1

https://bringatrailer.com/listing/1988-caterham-super-7-2/?utm_source=transactionalemail&utm_medium=email&utm_campaign=bat_model_notification

Linky?

Caterham Reversing Lamps Two OEM Caterham Reversing Lamps and Rubber wedges http://www.usa7s.net/vb/attachment.php?attachmentid=15759&stc=1http://www.usa7s.net/vb/attachment.php?attachmentid=15760&stc=1http://www.usa7s.net/vb/attachment.php?attachmentid=15761&stc=1 I Purchased these direct from Caterham but decided on a different look http://www.usa7s.net/vb/attachment.php?attachmentid=15763&stc=1 $20 Each 5 bucks FedEx Ground CUS

New Moroso Oil Separator Specs Part # 85612 Large body Separator Tank Shape: Round Separator Tank Diameter (in): 2.125 in. Separator Tank Height (in): 4.500 in. Separator Tank Material: Aluminum Separator Tank Finish: Polished Fitting Attachment 1: Hose barb Fitting Size 1: 1/2 in. Fitting Attachment 2: Hose barb Fitting Size 2: 1/2 in. Includes mounting bracket Purchased this but did not fit my application comes with all original installation sheets and mounting hardware. $150 new sell for $75 bucks Inc shipping http://www.usa7s.net/vb/attachment.php?attachmentid=15757&stc=1http://www.usa7s.net/vb/attachment.php?attachmentid=15758&stc=1